技術論文とプレゼンテーション

A novel propellant technology requires extruding two formulations with differential burning rates together as a multilayered propellant. This propellant is processed into a concentric cylinder configuration, in the form of slow-fast-slow with single perforation. The material uses ... 詳細を見る

Oil and water are immiscible fluids and they tend to separate very easily when introduced into a flow stream from two different sources in a flow loop. This model studies the development of mixture volume fraction in an oil-water-flow loop with 3 different passive mixing schemes: (i) ... 詳細を見る

This study is to investigate the velocity pattern and the velocity magnitude of the cuttings that is being processed in the process mill as a result of the rotating hammers. The process mill consists of a horizontal cylindrical shell equipped with renewable liners and rotating hammers ... 詳細を見る

Metal reed valves are used for flow rectification in electrohydraulic pumps driven by smart materials at high frequencies but it is difficult to predict their behavior when the surrounding fluid has considerable inertia and viscosity. Simulation of this phenomenon involves modeling the ... 詳細を見る

A 2D transient heat conduction model was created in COMSOL Multiphysics® software to study the performance of photovoltaic-thermal (PVT) water system. The model captures the variation of important environmental and system parameters such as outside temperature, solar irradiation, air ... 詳細を見る

Flexography is a roll-based mass printing process used in manufacture of printed products such as sensors, self-cleaning surfaces, and flexible electronics. Flexography involves inking of a stamp wrapped around a roller, and the transfer of ink on the stamp surface to a printing ... 詳細を見る

Pyrolysis is a key step in the conversion of carbonaceous materials into useful products. In this study, we investigate the pyrolysis of asphaltene and oil shale, both experimentally and numerically. COMSOL Multiphysics® software is used to model the combined effects of fluid flow in ... 詳細を見る

Significant submarine mineral deposits form when hot, metal-laden, saline fluids emerge onto the seafloor and mix with ambient seawater. Resulting density changes of fluid mixtures can trigger fluid buoyancy reversals, brine pool formation, and metal accumulation (Figure 1). While some ... 詳細を見る

2D steady state heat conduction-electric current model was created in COMSOL Multiphysics® software to study the performance of thermoelectric generator-photovoltaic-thermal (TEG-PVT) system. Four different cases were studied in the paper. In case 1, PV cells without concentrator was ... 詳細を見る

Accurate thermo-physical properties of materials are valuable for both scientific research and industrial applications. For high temperature liquid materials, two issues exclude traditional methods: elevated reactivity of test material and experimental apparatus, uncontrolled heat ... 詳細を見る