技術情報とプレゼンテーション

To reduce friction in lubricated tribological contacts, the surfaces of the contacting bodies can be microstructured to improve lubricating conditions. For lower loaded contacts this approach has already reached industrial applications, e.g. the piston-liner contact. For higher loaded ... 詳細を見る

This paper explores methods of improving the heat transfer coefficient in a crossflow heat exchanger as would be employed in conjunction with an experimental or production microreactor. This derivation of the Cross-Flow Heat Exchanger from the COMSOL Multiphysics® software Model Library ... 詳細を見る

This study is to investigate the velocity pattern and the velocity magnitude of the cuttings that is being processed in the process mill as a result of the rotating hammers. The process mill consists of a horizontal cylindrical shell equipped with renewable liners and rotating hammers ... 詳細を見る

COMSOL Multiphysics® has been used to predict the magnetic fields, eddy current, lorenz forces and stresses during a disruption for the new Advanced Outer Divertor for the Alcator C-Mod tokamak. A tokamak is used to study magnetic confinement of plasma for fusion, and a disruption ... 詳細を見る

Seawater intrusion into coastal aquifers is usually modeled by using transport models that include account for the effect of variable-density on flow. Variable-density models can be validated with the Henry and Elder benchmark problems. However, when mixed convective flow is simulated ... 詳細を見る

Metal reed valves are used for flow rectification in electrohydraulic pumps driven by smart materials at high frequencies but it is difficult to predict their behavior when the surrounding fluid has considerable inertia and viscosity. Simulation of this phenomenon involves modeling the ... 詳細を見る

Pyrolysis is a key step in the conversion of carbonaceous materials into useful products. In this study, we investigate the pyrolysis of asphaltene and oil shale, both experimentally and numerically. COMSOL Multiphysics® software is used to model the combined effects of fluid flow in ... 詳細を見る

Significant submarine mineral deposits form when hot, metal-laden, saline fluids emerge onto the seafloor and mix with ambient seawater. Resulting density changes of fluid mixtures can trigger fluid buoyancy reversals, brine pool formation, and metal accumulation (Figure 1). While some ... 詳細を見る

Microcontact printing is a method for depositing patterns of thin films or molecular monolayers on surfaces using a polydimethylsiloxane (PDMS) stamp for selective mechanical contact (Figure 1). Undesired deformation of the stamp features during printing affects printed pattern quality. ... 詳細を見る

This paper reports the structural solid mechanic simulation of a MEMS out-of-plane platform that provides thermal and electrical isolation for a device built on it. When assemble, the platform lifted for approximately 400 μm above the substrate level. A mechanical stress analysis is then ... 詳細を見る