技術情報とプレゼンテーション

This paper presents a 3D finite element model in COMSOL for the electro-thermal analysis of high power light emitting diodes (LEDs). The proposed model and implementation approach require basic electrical and optical parameters that may be experimentally derived with the aid of advanced ... 詳細を見る

The measurement and regulation of particulate matter to improve outside air quality advanced a lot over the last decades. This also made it necessary to develop primary standards for calibrating these measurement systems and in future the composition of relevant aerosols will be taken ... 詳細を見る

Two-component adhesives are commonly used for sealing and joining in transport applications for mechanically highly stressed connections. At the Chemnitz University of Technology an innovative system technology for the user-friendly, wireless and energy-efficient processing of two ... 詳細を見る

Induction furnace plays a very important role in the melting of high metal & metallic alloys. This furnace has an ability to quickly and efficiently heating of the material without being in physical contact. Such kind of heating mechanisms offers appropriate technology solutions to many ... 詳細を見る

The Purpose of this paper is to develop a thermal model using COMSOL Multiphysics® software that aims to get an idea of the heat flow around the ASIC, as well as to address the thermal issues for integrated circuits at the tongue board. However, we need sources of heat simulations to map ... 詳細を見る

In the field of electric machines, a trend towards both higher efficiency and higher power density is observed. This has led to a growing importance of Permanent Magnet Synchronous Machines. However, the magnets used in these machines risk demagnetization at high temperatures. Especially ... 詳細を見る

In this work we investigate a wet-chemical silicon etching process. COMSOL Multiphysics® is used to extract local pressure values to correlate them to experimental results. The test setup consists of a box with a fixed wafer and a nozzle that injects an etchant jet onto the wafer ... 詳細を見る

The need for high storage capacitors led to the development of polymer based capacitors. Polymers have high processability, mechanical flexibility, electrical breakdown strength and compatibility with printed circuit board (PCB) technologies; but usually have very low permittivity (K). ... 詳細を見る

Lamb waves are elastic waves propagating in free solid plates. In the case of plates loaded with a fluid, the equations describing these waves have to be modified to include the effects of the fluid. In our work we have tackled this problem using COMSOL Multiphysics®. We have used the ... 詳細を見る

The progression toward smaller and faster photonic circuits has led to the development of nanophotonic platforms capable of compacting many devices onto an integrated chip. These devices, as well as the input and output grating couplers, are sometimes polarization dependent, which allows ... 詳細を見る