技術情報とプレゼンテーション

Introduction: The simulation of coupled heat and moisture transfer in constructions is becoming even more important in the last years. COMSOL Multiphysics represents a powerful tool for this kind of simulations as shown in [1,2,3], although applications in this area are still rare. For ... 詳細を見る

Morphogenesis is a tightly regulated process that has been studied for decades. Previously we developed data-based mechanistic models for a range of developmental processes with a view to integrate the available knowledge and to better understand the underlying regulatory logic. In our ... 詳細を見る

One viable alternative to non-renewable fossil fuels is the fuel cell. A special class of FC i.e. Proton Exchange Membrane Fuel Cell (PEMFC) has been investigated during the present study. Membrane is a very important part of a PEMFC as most ohmic losses occurs here and limits the ... 詳細を見る

Solar drying is a ubiquitous method that has been adopted for many years as a food preservation method. Most of the published articles in the literature provide insight on the performance of solar dryers in service but little information on the dryer construction material selection ... 詳細を見る

The bentonite barrier is an essential part of a safe spent fuel repository in granitic bedrock. In this work COMSOL Multiphysics® is used in modelling the Thermal (T), Hydrological (H), Mechanical (M) and Chemical (C) phenomena and processes taking place in a bentonite buffer. Special ... 詳細を見る

This paper presents a 3D numerical model to predict the whole process of coaxial powder flow, including the particle stream flow in and below the nozzle and also the laser-particle interaction process. The Particle Tracing Module of COMSOL Multiphysics is used to solve the coupled ... 詳細を見る

For this work the multi-objective design environment modeFRONTIER was integrated with COMSOL, bringing the advantages of multi-objective optimization to multiphysics simulations. Practically any commercial analysis tool (such as COMSOL) or in-house code can be integrated within ... 詳細を見る

Direct numerical simulation of single- and two-phase flow in real pore systems is addressed in our paper. The X–ray computed micro-tomography technique has been applied first to reconstruct in details a real pore space of a subcentimetric sample. Making use of dedicated software (ScanIP) ... 詳細を見る

Bridge piers and abutments makeup the bridge substructure and transmit loads from the superstructure to the bridge foundation material (Figure 1). The bridge abutment serves three purposes: to provide vertical support to the bridge superstructure where the bridge ends, to connect the ... 詳細を見る

The method to derive upscaled expressions for the dispersion coefficients for reactive flow in a porous medium uses a periodic unit cell (PUC), which consists for instance of a spherical grain in a cube, but nothing prohibits defining more complex PUC's. Homogenization leads to a coupled ... 詳細を見る