技術情報とプレゼンテーション

Microfluidics is the science of manipulating and controlling fluids at the micron scale. Although, fluid flow in standard geometries can be determined easily by analytical methods, a more rigorous computational model is required for custom geometries. Achira’s microfluidics cartridge has ... 詳細を見る

The high speed gas turbine is a power plant developed for modern aircrafts. It is widely used and developed because it can meet the high power to weight ratio. The rotor system of modern small gas turbine works above the critical speeds. Hence, there is a stricter requirement for the ... 詳細を見る

Lithium-ion batteries are most preferable energy storage devices for its higher energy density, flexible form factor and lightweight design than comparable battery technologies. The present simulation work is focused on incorporating contact thermal resistance within a two-dimensional ... 詳細を見る

The dynamic response of microcantilever, which is a simple microelectromechanical system (MEMS) structure, to sine wave excitation is studied using the vibrational speaker set up in the atmospheric damping. Microcantilever is fabricated using micro wire cut EDM process for high ... 詳細を見る

Waveguide Structures are often used for transmission of high CW power. The inherent conductor losses in the waveguide material lead to an increase in its temperature. If appropriate thermal management is not undertaken, this high temperature may lower the breakdown threshold of the ... 詳細を見る

The modelling of a ferrite material is conventionally carried out using the Polder permeability tensor which assumes that the ferrite is saturated by a uniform magnetic field. This assumption is often inaccurate due to the constraints imposed by boundary conditions which renders the ... 詳細を見る

The attempt has taken to miniaturized size of non contact temperature sensor by using ultrasonic trans-receiver. The piezoelectric material is used in both transmitter and receiver ends for this ultrasonic Micro-Electronics Mechanical Systems (MEMS) based temperature sensing device. ... 詳細を見る

Marangoni flow affects the heat and mass transfer occurring in the molten metal regions in welding and additive manufacturing processes. It originates from the surface tension gradient (∂γ/∂T) induced at the melt pool surface due to the temperature difference. The flow pattern within ... 詳細を見る

The Finite Element Model is analyzed with impounded water considering appropriate boundary conditions between the water & the upstream face of the dam .The fluid on the upstream side is considered to be incompressible, inviscous, and irrotational. Here the effect of fluid ... 詳細を見る

Several acoustic vector-sensor (AVS) configurations have been tested for direction of arrival (DoA) estimation in a diffused reverberant environment using pressure gradient method. The discrete pressure sensors have been arranged with different geometrical placement and pressure ... 詳細を見る