技術情報とプレゼンテーション

Vacuum infusion processes are well adapted for large composites parts and, therefore, widely used for the manufacturing purposes in several applications fields such as aviation or naval industry. Simply speaking single plies or a given fibrous reinforcement is pre-shaped and positioned ... 詳細を見る

Knee joints are often subject to high loads, which can lead to injury, malalignment, and the progression of osteoarthritis in patients. To better understand the behavior, and the effect of meniscal damage and different meniscectomy repair approaches, a 3D structural mechanics model of a ... 詳細を見る

Flash floods are sudden and mostly destructive rushes of water down narrow gullies or over sloping surfaces. They are mostly caused by heavy rainfall in the upstream watershed. They may also appear as result of catastrophic events as dam or levee breaks, or mudslides or debris flow. ... 詳細を見る

Studies of poroelastic systems increasingly utilize numerical modeling. Especially for geotechnical applications models are set up as a tool to understand phenomena in porous media that deform due to changes of the hydraulic regime, or in which the flow field is affected by changes of ... 詳細を見る

A new electrochemical polishing facility will be built at CERN to process copper radiofrequency structures and this in the framework of the Future Circular Collider study. This polishing installation will be designed and assembled so that the necessary working conditions to achieve the ... 詳細を見る

Using a 1-D model of polymer displacement, we analyze the exergy (maximum attainable work) balance of viscosified water, e.g. with Arabic gum. The 1-D model shows the principle how such an analysis can be done. A comparison as to the displacement efficiency is made between three ... 詳細を見る

For the complex 3D biocompatible metallic parts, with high level of customization, used in medical prosthesis and implants Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) are the most common Additive Manufacturing technologies used nowadays. However, both ... 詳細を見る

Line lightning protection devices (LLPD) nowadays are widely used for lightning protection of overhead power lines. LLPD is composed of electrodes in series embedded in silicone rubber which all together forms sequence of spark gaps. When lightning overvoltage is applied it causes ... 詳細を見る

The use of Permanent Magnet Synchronous Machines (PMSM) as shaft generators is not new in marine vessels propulsion drive trains. Due to risk of fires in stator windings by internal faults, DNV GL requires the shaft generator to be electrically dead without losing propulsion. This ... 詳細を見る

Arcam AB has pioneered additive manufacturing using the electron beam melting (EBM) technology which provides a cost efficient and novel way of producing titanium components for the orthopedic and aerospace industries. In the heart of the EBM technology is the electron beam – whose ... 詳細を見る