研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL Conference 2024 論文集を見る
In this paper, the topic of magnetic particle separation in a liquid column based on magnetophoresis is studied in depth. Magnetic powders are important basic materials for filaments, pastes and inks that need to exhibit magnetic properties. The geometric dimensions of the particles are ... 詳細を見る
Obtaining a good coverage of Digital Audio Broadcasting (DAB) service, in the 200 MHz band, in motorway tunnels is quite a challenging task. Recently, Rai Research Centre (CRITS) has been involved in investigating alternative (and cheaper) solutions than those adopted so far (radiating ... 詳細を見る
The increasing demand for large battery packs, driven by the expanding markets for electric vehicles (EVs) and grid-scale energy storage system, necessitates the development rapid battery pack development pipelines such as simulation. We present an integrated multiscale simulation ... 詳細を見る
Microwave heating for CO_2 desorption provides fast, low-temperature desorption, lowering energy requirements in carbon capture. According to studies, microwaves generate selective heating, dramatically increasing desorption rates compared to traditional approaches. This new technique ... 詳細を見る
Markus Zahn received all his education at MIT, was a professor in the Department of Electrical Engineering at the University of Florida, Gainesville from 1970-1980, and then joined the MIT Department of Electrical Engineering and Computer Science faculty in 1980. He works in the ... 詳細を見る
Efficient mixing and pumping of liquids at the microscale is a technology that is still to be optimized. The combination of an AC electric field with a small temperature gradient leads to a strong electrothermal flow that can be used for multiple purposes. Combining simulations and ... 詳細を見る
Introduction Over the last years, there has been an increasing interest in plastic recycling as an alternative to reduce fossil fuel dependency. In this light, chemical recycling has been presented as a promising strategy to maximise the recycling rate, although this technology presents ... 詳細を見る
The simplicity, reliability and low costs of electro-mechanical breakers have made them the workhorse for the interruption of low voltage short-circuit currents. In the presence of a short circuit, the contacts of the breaker heat up, and a bridge of molten metal forms between the pair ... 詳細を見る
钨丝是早期热发射电子源阴极灯丝的关键材料，工程组件上多数采用的灯丝直径为0.127~0.203mm，一般将其制成V型发叉式。模型构建了三维灯丝几何结构，计算过程中对灯丝弯折角处的区域进行网格加密处理。结合COMSOL Multiphysics多物理场的电磁热模块，实现了对钨灯丝的温度分布模拟计算，并进一步计算不同几何结构和不同灯丝材料对灯丝温度分布的影响。仿真结果表明，在材料钨、钛、锆以及各种弯折角度下，灯丝最高温度与弯曲处温度差稳定在30~40K左右。从趋势上看，弯折角度α越小灯丝总温度越高。该工作解释了常见灯丝熔断点非灯丝针尖的工程问题 ... 詳細を見る
Axial-flux permanent-magnet motors are an important technology in many technical applications, being an alternative to radial-flux motors. Axial-flux motors come up with many advantages in comparison to radial-flux motors such as high-power density, higher torque to weight ratio etc. ... 詳細を見る
