技術情報とプレゼンテーション

Studies of the liquid metal movement (hydrodynamic) in a real object (tundish) are substantially precluded due to the objective difficulties (high temperature and the size of metallurgical equipment), compared to their execution by the use of physical and numerical modeling. In presented ... 詳細を見る

The classical optimization method has been applied to many design problems for electromagnetic systems. One of its major difficulties is related to meshing problems arising from shape modifications. In order to circumvent these kinds of technical difficulties with moving mesh problems, ... 詳細を見る

One of the main parameters to consider during the nuclear waste storage design phase is the drum corrosion risk. The humid-air corrosion models available in literature predict that, for carbon steel, the phenomena start to become appreciable for relative humidity (RH) values close to ... 詳細を見る

This paper intends to show a model of a monolithic reactor for the autothermal reforming process (ATR), a process that uses hydrocarbons to produce H2. The ATR chemical reactions take place on the surface of monolith channels coated with a catalyst. The isothermal ATR reactor is modeled ... 詳細を見る

Non-Newtonian laminar flows in curved circular tubes with inserts are investigated by computer simulations. 0.65% solution of NaCMC is considered. Three-dimensional incompressible Navier-Stokes equations are solved using COMSOL Multiphysics. Placements of inserts inside the curved tubes ... 詳細を見る

Silicon solar cells are produced in a series of different process steps in which wet-chemical etching and rinsing steps have a considerable influence on the quality of the wafers. Etching baths are used for surface structuring or intended etch back. Examples therefore are texturing, ... 詳細を見る

This work talks on simulation of a ventilating structure for an industrial burner. The mathematical model is based on the frozen-rotor technique, and the numerical simulation is used for resolution of fluid dynamics equations for the air flow into the rotating wheel and into the static ... 詳細を見る

We propose a simplified numerical method to model the flow field downstream of an axial impeller. The method can be used for any axial hydraulic machinery for which, one is less interested by the flow between the blades, than by the flow field downstream of the machinery. The method is ... 詳細を見る

The Life+ GreenWoolF project is aimed at demonstrating that green hydrolysis with superheated water is an effective way to convert wool wastes into organic nitrogen fertilizers. The core of the process is represented by the reaction tank (Figure 1) in which the hydrolyses reaction takes ... 詳細を見る

Gallium nitride (GaN) and its related nitride alloys with special physical properties are in technical areas of high interest. The growing of gallium nitride boules on non-native sapphire or silicon carbide requires complicated mechanisms of defect reduction in the lattice structure. ... 詳細を見る