研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL カンファレンス 2024 論文集を見る
Surface engineering is a key technology used in a wide range of sectors in industry. Among other techniques, it involves adding functionality to a surface. This can be performed by creating a specific topography to a surface using laser texturing. The objective of the work presented in ... 詳細を見る
Carbon nanotubes (CNTs) have been proven experimentally to be well suited for field emission applications. An optimized triode configured CNT field emission array is developed using the COMSOL Multiphysics Electrostatics Application to adjust five key physical dimensions to investigate ... 詳細を見る
Passive, one-way valves, also known as check valves, while common at the macro scale, are an essential microfluidic feature that facilitate flow rectification. These structures are also commonly used in reciprocating micropump configurations to control flow. Their operation can be ... 詳細を見る
利用高压电容器对单匝线圈放电是产生脉冲强磁场的技术之一，其电路模型简单，可以等效成RLC串联电路，但过程复杂，涉及电磁学、力学、热学、等离子体科学等众多学科。本文分析了其具体过程，并利用 COMSOL Multiphysics® 仿真平台进行了模拟，建立了二维和三维单匝线圈模型，重点研究了线圈的动态特性对磁场分布的影响，并对比了其结果和模型准确性；然后，讨论了线圈的尺寸和所产生磁场的关系；最后通过实验验证了仿真模型的准确性，为今后的相关科学研究奠定了基础。 詳細を見る
Surface Plasmons (SP) or Surface Plasmon Polaritons (SPP) are electromagnetic excitations that propagate at the interface between a dielectric and a conductor, and are evanescently confined in the perpendicular direction to the propagation. They arise via coupling of the electromagnetic ... 詳細を見る
在电磁兼容领域中，除了电磁干扰还会存在毁灭性的电磁辐射危害。其中电磁辐射对燃油危害的研究关键在于掌握射频放电的击穿特性，为研究不同频率的击穿特性，本文基于电磁场和电路理论，以飞机油箱口结构为例构建了氩气射频放电前后的等效电路模型，并简要分析了射频放电规律。根据电磁场和电路理论，飞机油箱口放电结构等效为圆柱型交流电容，等效电路的并联电阻阻值随气体的导电性能变化而变化，能有效表征气体击穿电离程度的高低。仿真研究表明，相同激励电压条件下，频率越高，气体越容易击穿，等效并联电阻阻值越低。气体击穿电离程度随频率升高存在不连续放电、连续稳定放电、积累效应和雪崩效应四种不同的放电规律。 詳細を見る
The high speed gas turbine is a power plant developed for modern aircrafts. It is widely used and developed because it can meet the high power to weight ratio. The rotor system of modern small gas turbine works above the critical speeds. Hence, there is a stricter requirement for the ... 詳細を見る
The use of LEDs package for lighting presents a thermal problem. In fact, 70% of the energy consumption is converted to heat. This affects widely the LEDs performance especially lifetime and luminous efficiency. Thermal management of LED is interested in natural convection cooling. The ... 詳細を見る
Electroporation is a biotechnological technique which subjects cells to strong (~kV/cm), short (~ms) electric field pulses that open pores on the cells’ plasma membranes. Under the appropriate conditions, the pores mediate the passage of exogenous material into cells. If the pores ... 詳細を見る
Since 2011, LATMOS has been involved in the development of Micro-ARES, an electric field sensor forming part of the DREAMS science payload of the ExoMars 2016 Schiaparelli entry, descent and landing demonstrator module (EDM). Micro-ARES is dedicated to the very first measurement and ... 詳細を見る