技術情報とプレゼンテーション

Capacitor is mainly defined as two conducting plates that can hold the opposite charges on it. These plates can be used either as a sensor or an actuator. If the relative distance between the two conductors changes as result of given input, then capacitance values will change. This ... 詳細を見る

Dynamic measurement of magnetic particles in continuous flow devices is made very difficult by the limitations imposed by the sensors themselves. Thus, certain sensor layouts are restricted to either number sensitive or spatial resolutive measurements of magnetic particles. We ... 詳細を見る

The possibility to detect and probe molecules in microfluidic devices gives rise to interesting applications. There are different approaches how to detect and probe particles, but a common step, for most methods, is to place the particles on a sensor. This can be done by applying ... 詳細を見る

Micro-Electro-Mechanical Devices such as acoustics sensors, finger print sensors, tunable capacitors etc. are widely used in commercial applications. The pressure sensors use membranes which deflect upon applied pressure load. The most important aspect of any pressure sensor is its ... 詳細を見る

The objective of this paper is to show the simulation of a piezoelectric thin film device and its application as a sensor. Piezoelectric aluminum nitride thin film clamped at two ends is simulated using COMSOL Multiphysics software. The device consists of the piezoelectric thin film ... 詳細を見る

Thermal conductivity of near surface soil layers is a key parameter for understanding the energy balance of planetary bodies. To measure this property, heated needle sensors are frequently used in field and laboratory applications. To adapt this type of sensors for application on space ... 詳細を見る

This paper focuses on the diaphragm design and optimization of a piezoresistive Micro Electro Mechanical System (MEMS) pressure sensor by considering Very Large Scale Integration (VLSI) layout schemes. The aim of these studies is to find an optimal diaphragm shape by Finite Element ... 詳細を見る

An investigation was undertaken into the suitability of using COMSOL for modeling an aircraft capacitive fuel gauging unit. A model of a sensor immersed in a fluid was developed for rectangular tank geometry with a range of fluid levels and sensor orientation using the electrostatics ... 詳細を見る

We are developing a solid state gas sensor that combines a small form factor with the high sensitivity of optical gas detection. The gas sensor is based on an optical resonant microsystem that is penetrated by gas molecules. This microsystem consists of an array of vertical rods in air ... 詳細を見る

Permanent magnets are ubiquitous in our world today, from refrigerator magnets to industrial sensor applications. Often, the magnitude of the field at a specific distance from an arbitrarily shaped magnet of variable strength is a necessary parameter for end-use systems. We used the the ... 詳細を見る