技術情報とプレゼンテーション

Biosensors based on silicon nanowires are of great interest for ultrasensitive biomolecular recognition of disease specific markers for early stage diagnosis [1]. However, there are limitations on the performance of these nanosensors in solutions at high ionic strength. This is because ... 詳細を見る

This poster focuses on the development of a capacitive pressure sensor for condition monitoring applications. One method to measure vibrations is to mount an pressure sensor on the vibrating machinery or object and measure the pressure exerted due to vibrations. Measured pressure level ... 詳細を見る

Lubricant oil is used to ensure proper functioning of industrial machinery such as turbines, gears, bearings and compressors. Oil analysis is used to detect and quantify the presence of wear metals and other contaminants in the lubricant of oil wetted systems, by sensing the change in ... 詳細を見る

In this study, COMSOL Multiphysics® software was used to simulate the surface response to excitation method (SuRE). An aluminum beam with a piezoelectric element bonded is modeled using the COMSOL Acoustics Module. A frequency domain sweep study was performed to simulate the sweep sign ... 詳細を見る

Pulsed eddy current (PEC) is being developed to detect stress corrosion cracks between fasteners on the inner wing spars of the F/A-18 Hornet aircraft. The spars are located below a thick carbon/epoxy wing skin, and so cannot be detected by conventional eddy current techniques without ... 詳細を見る

A model of a cell counter sensor based on Impedance Spectroscopy (IS) has been implemented in COMSOL Multiphysics. The cell counter is a silicon-based microdevice consisting in 3D electrodes placed in a wide microchannel: cells flow in the microchannel through the electrodes to be ... 詳細を見る

This communication reports on a numeric fluid dynamics simulation on a pipe flow model. The basic background is to determine the velocity of a flowing fluid in a pipe by using the Thermal Time-Of-Flight (TTOF) method on water. The visualization of the temperature and velocity ... 詳細を見る

Fluorescence Diffuse Optical Tomography (FDOT) uses Near Infra-Red (NIR) light to monitor physiological changes in internal organs. NIR light being less energetic in nature can be used for continuous monitoring of tumor infected biological tissue, neonatal brain and many such ... 詳細を見る

There is a practical interest among composite materials manufacturers to high-speed accurate non-destructive evaluation (NDE) technology for voids inspection when these voids are natural components of such complex structures like resin insulated layer of double-sided copper-clad ... 詳細を見る

One of the most promising categories of semiconductor-based sensors is organic electrochemical transistor (OECT), which consists of three electrodes (Source, Drain and Gate) and two active layers: electrolyte and conductive polymer. Despite the fact that OECT attracts a lot of attention ... 詳細を見る