技術情報とプレゼンテーション

Introduction The electrical properties of materials are important in many different applications. In microelectronics for example, films must perform as insulators, semiconductor or as conducting layers. In recent years, scanning probe methods are being extended to the nanometre scale ... 詳細を見る

Traditionally, municipal sewer and water agencies have relied on acoustic data loggers and closed-circuit television cameras to inspect pipes for leaks. In addition, the same legacy techniques have been used to certify new and rehabilitated pipes as watertight. Unfortunately, visually ... 詳細を見る

Zinc Oxide (ZnO) was chosen as the piezoelectric material. A multi – d31 mode cantilever design was used, with varying dimensions of cantilever, to form an array. The individual cantilevers can be either connected in series or in parallel to achieve different output characteristics. ... 詳細を見る

Electromagnetic actuators are representing one important component of ABB's medium voltage reclosers [1, 2]. Their performance is strongly influenced by the considered material properties as well as by the electronic control units that will power the actuator. Depending on the studied ... 詳細を見る

In high-speed digital design, strong electromagnetic coupling exists between adjacent transmission lines. This manifests itself in the form of crosstalk voltage induced on either line. Crosstalk is modeled in terms of capacitance and inductance matrices which are extracted using COMSOL ... 詳細を見る

Dilution’s issue during dry machining have raised the interest’s environmental researchers and engineers. In fact, the sampling of dust emitted during dry machining was a serious problem for air quality evaluation at the workplace. Furthermore, the best sampling of fine and ultrafine ... 詳細を見る

High power Lower-Hybrid RF waves injected at in a Tokamak plasma can strongly modify the edge plasma. This is caused by ponderomotive forces pushing charged particles in an inhomogeneous oscillating electromagnetic field towards weaker field areas. On the Alcator C-Mod Tokamak, edge ... 詳細を見る

Conventional passive microfluidic flow-focusing devices confront difficulties in controlling droplet sizes in dripping regime especially when the dispersed phase has a large viscosity. It is reported that external electric field can be used to manipulate the droplet breakup. In the ... 詳細を見る

Arcam AB has pioneered additive manufacturing using the electron beam melting (EBM) technology which provides a cost efficient and novel way of producing titanium components for the orthopedic and aerospace industries. In the heart of the EBM technology is the electron beam – whose ... 詳細を見る

Microwave sensing and monitoring is very attractive for biological applications because of their sensitivity to water and dielectric contrast. Direct detection of biological structures in microwave frequencies and understanding of the molecular mechanisms of microwave effects is ... 詳細を見る