技術情報とプレゼンテーション

Pioneering Computational Models for the Built Environment Energy performance is becoming more important in the build environment. With better insulated buildings, the possibility of moisture problems and thermal bridges increases. There for, it is not only important to determine the ... 詳細を見る

A kernel of grain is modeled as an isothermal sphere, with descriptive differential equations scaled or rendered into non-dimensional form, where moisture transfer is governed by internal diffusivity, not by surface conditions. The time dependent problem is solved with COMSOL and the ... 詳細を見る

Gallium nitride (GaN) and its related nitride alloys with special physical properties are in technical areas of high interest. The growing of gallium nitride boules on non-native sapphire or silicon carbide requires complicated mechanisms of defect reduction in the lattice structure. ... 詳細を見る

In this study, a model of in-situ geothermal energy piles was constructed using COMSOL Multiphysics® software. Geothermal energy piles serve two purposes, first to transfer building load into the subsurface, but also to extract thermal heat from surrounding soils. This is achieved using ... 詳細を見る

Analytical methods used for inductance calculation of toroidal coils yield large errors in the case of coils sparsely wound on low permeability cores. Numerical field calculations can provide “exact” figures. We have outlined several simulation methods. Simplifications, assumptions, and ... 詳細を見る

On the surface of an optical waveguide, there is an evanescent field. The evanescent field decays fast and this steep gradient can be used to pull nano- and microparticles down towards the waveguide surface. Radiation forces will propel the particle forward along the waveguide. Trapping ... 詳細を見る

Tom Quinn works as a Partner Business Development Manager for Microsoft as part of its HPC team working together with ISV, OEM and SI partners, in the HPC marketplace. Before joining Microsoft, Mr. Quinn worked as the Director of Government Business Development for Linux Networx, a small ... 詳細を見る

This report mainly discusses the implementation and results of a project proposal, “Modelling using Finite Element Methods”. The report is devoted to implementation, which is a model of an electromagnet. The software tool that is used to model the electromagnet is COMSOL Multiphysics®, a ... 詳細を見る

As an effective method to cope with green-house gas emission, and to enhance oil recovery, injection of carbon dioxide into oil reservoirs has obtained increasing attentions. The flooding process involves complex phase behavior among oil, brine and CO2, and geochemical reaction between ... 詳細を見る

Electronic devices produce a very high rate of specific heat with respect to their dimensions. Exceeding in maximum safe operating temperature means strong reduction of efficiency, reliability and lifetime. In addition, electronic devices are subjected to periodical thermal loading. ... 詳細を見る