技術情報とプレゼンテーション

节能、高效、紧凑已经成为制冷空调行业的发展趋势，其中强化换热技术尤为关键。因此，本文采用COMSOL软件对微型错排管换热器进行了建立二维模型，基于瞬态模型，采用流动和传热模块进行有无交变压力波的数值模拟分析。结果发现随着交变压力波的添加大大增加了速度场、压力场及温度场的波动情况，使得管内工质边界层破坏降低了传热的热阻综合空化链式理论，交变压力波能够起到强化传热的作用，提高了制冷效率，有利于推动制冷行业的发展。 詳細を見る

Redmer van Tijum studied Applied Physics at the University of Groningen. In 2006, he received his PhD title on ‘Interface and surface roughness of polymer metal laminates’ in the field of Material Science at the University of Groningen. After that he became research and development ... 詳細を見る

Marine Vibrators are a coherent type of sound source, which can be quieter and less harmful for marine habitants than traditional air-gun technology. Such source gives clearer, more precise and higher resolution imaging of the bottom properties due to the coherent signal and streamer ... 詳細を見る

Introduction With the vast development in the aerospace industry it is inevitable that currently used materials such as Nickel based super alloys will soon reach its peak performance. Hence developing alternative materials with similar properties that could be enhanced further is ... 詳細を見る

Manufacturing and finishing of components with complex internal features is a significant challenge. Industrial sectors like automotive industry, aeronautics or medical technology require these internal features with highest precision and repeatability. Such components are often machined ... 詳細を見る

In addition to using advanced functions built-into the engine of the COMSOL Multiphysics® software, we integrate dynamic properties of rotating components that are measured or pre-computed. Here, it is shown how to integrate fluid-film characteristics and take advantage of post ... 詳細を見る

Ultrasound is a promising green technology for the advanced oxidation process (AOP) since it adds no chemicals to the treated water. In this paper, COMSOL Multiphysics® was used as a tool to design and characterize an ultrasound irradiator with multi-stepped configuration, which aims to ... 詳細を見る

Highly loaded lubricated machine elements such as gears or camshafts are an integral part in a wide variety of technical products. Due to higher efficiency requirements these machine elements have to be improved continuously, which leads to the necessity to investigate physical ... 詳細を見る

Acoustic streaming (AS) describes a physical phenomenon where an oscillating sound emitter induces a steady fluid motion. Metal processing industry applies this treatment for grain morphology adjustments during the solidification of metal. Improvement and further development of this ... 詳細を見る

This study presents a rotordynamic analysis of a rotor on hydrodynamic bearings using COMSOL Multiphysics®. In this paper, the complexity of the model is gradually increased. Starting point of the analysis is the modal analysis of the rotor in free-free conditions. A Reynolds model is ... 詳細を見る