技術情報とプレゼンテーション

クイック検索

資料

ホワイトペーパーとアプリケーションノート

研究開発におけるマルチフィジックスシミュレーションの具体例

さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.

COMSOL カンファレンス 2024 論文集を見る

すべて

Boston 2024

Florence 2024

Virtual Thermal Ablation in the Head and Neck using COMSOL Multiphysics

U. Topaloglu[1], Y. Yan[2], P. Novak[2], P. Spring[3], J. Suen[3], and G. Shafirstein[3]
[1] Department of Information Technology, University of Arkansas for Medical Sciences, Little Rock, Arkansas, USA
[2]Department of Radiation Oncology, University of Arkansas for Medical Sciences, Little Rock, Arkansas, USA
[3]Department of Otolaryngology, University of Arkansas for Medical Sciences, Little Rock, Arkansas, USA

Thermal ablation in the head and neck requires accurate thermal dose delivery to target tissue while protecting the structure and function of nearby tissue and organs. In this study, we present a method that allows importing Computed Tomography (CT) scans to COMSOL, in order to model ... 詳細を見る

Depth-Averaged Modeling of Groundwater Flow and Transport

P. Kitanidis
Civil and Environmental Engineering, Stanford University, Stanford, CA, USA

In many groundwater studies, the areal extent of an aquifer is much larger than its thickness so that flow and transport take place primarily in horizontal directions. Thus, the most common type of modeling in practical applications is two-dimensional involving vertically averaged ... 詳細を見る

Designing Piezoelectric Interdigitated Microactuators using COMSOL

O. Myers [1], M. Anjanappa [2], and C. Freidhoff [3]

[1] Mississippi State University, Mississippi State, MS, USA
[2] University of Maryland Baltimore County, Baltimore, MD, USA
[3] Northrop Grumman Corporation, Electronics Systems Sector, Baltimore, MD, USA

This paper presents a methodology towards designing, analyzing and optimizing piezoelectric interdigitated microactuators using COMSOL Multiphysics. The models used in this study were based on a circularly interdigitated design that takes advantage of primarily the d{;sub}33 ... 詳細を見る

Shape, Convection and Convergence

R. Pryor
Pryor Knowledge Systems, Inc., Bloomfield Hills, MI, USA

COMSOL Multiphysics software, when properly configured, can readily solve modeling problems in the laminar flow regime using the standard Navier-Stokes equations or in the fully turbulent flow regime using the kappa-epsilon model. Failure to solve a particular model is typically ... 詳細を見る

In-Situ Detection of Inclusions in Liquid Steel

X. Wang, R. Guthrie, and M. Isac
McGill Metals Processing Centre, Montreal, Canada.

A numerical multiphase flow model is proposed to predict the behavior and motion of entrained inclusions in liquid steel, as they enter the orifice of a LiMCA (Liquid Metal Cleanliness Analyzer) sensor for assuring steel quality. The method of measurement is based on the electric sensing ... 詳細を見る

Fluidmechanical Damping Analysis of Resonant Micromirrors with Out-of-plane Comb Drive

T. Klose[1], H. Conrad[2], T. Sandner[1], and H. Schenk[1]

[1]Fraunhofer Institute Photonic Microsystems (FhG-IPMS), Germany
[2]TU Dresden, Semiconductor and Microsystems Technology Laboratory, Germany

Damping is the liminting factor for the reachable maximum deflection. Thus, it is a very important issue for resonant microsystems. In this paper, we present a damping model for out-of-plane comb driven resonant micromirrors. The basic concept of this model is to attribute viscous ... 詳細を見る

Solving Time-Dependent Optimal Control Problems in COMSOL Multiphysics

I. Neitzel[1], U. Prüfert[2], and T. Slawig[3]
[1]DFG priority program SPP 1253, Technische Universität Berlin, Berlin, Germany
[2]DFG research center Matheon, Technische Universität Berlin, Germany
[3]DFG Cluster of Excellence The Future Ocean, DFG priority progam SPP 1253, Christian-Albrechts-Universität zu Kiel, Kiel, Germany

We use COMSOL Multiphysics to solve time-dependent optimal control problems for partial differential equations whose optimality conditions can be formulated as a PDE. For a class of linear-quadratic model problems we summarize known analytic results on existence of solutions and first ... 詳細を見る

Modeling 2D and 3D of Hybrid Laser Nd:Yag - MIG Welding Processes

E. Le Guen[1], R. Fabbro[1], F. Coste[1], M. Carin[2], and P. Le Masson[2]
[1]LALP (CNRS)/GIP GERAILP, Arcueil, France
[2]LIMATB, Université de Bretagne Sud, Lorient, France

Hybrid laser-MIG arc welding has very interesting advantages compared to laser welding or arc welding used separately. It is known that improvement of productivity results in higher welding speeds, thicker welded materials, joint fit-up allowance, better stability of molten pool, and ... 詳細を見る

Time-Resolved Optical Tomography in Preclinical Studies: Propagation of Excitation and Fluorescence Photons.

F. Nouizi[1], R. Chabrier[1], M. Torregrossa[2], and P. Poulet[1]
[1]Laboratoire d’Imagerie et de Neurosciences Cognitives, Straßbourg, France
[2]Laboratoire des Sciences de l'Image, de l'Informatique et de la Télédétection, France

We present time-resolved methods that rely on near-infrared photons to image the optical properties and distribution of fluorescent probes in small laboratory animals. The coupled diffusion equations of excitation and fluorescence photons in highly scattering tissues were solved using ... 詳細を見る

Micro Cooling of SQUID Sensor

B. Ottosson[1], Y. Jouahri[2], C. Rusu[1], and P. Enoksson[2]
[1]Imego AB, Gothenburg, Sweden
[2]Chalmers University of Technology, Gothenburg, Sweden

The objective of this work has been to realize a feasibility study of a cooling device for a SQUID sensor using liquid nitrogen flowing through micro channels. The design consists of an epoxy cylindrical vacuum vessel skewed by a silicon microchannel heat sink. The SQUID sensor is ... 詳細を見る

最初

前

5081–5090 of 5983

次

最後