技術情報とプレゼンテーション

The concept of virtual prototyping can be found linked to many different keywords in the literature: modeling, look-ahead problem solving, etc. This poster paper briefly discusses the potential real benefits that can be realized through pre-build cost savings, minimization of the number ... 詳細を見る

Controlling electric field distribution in high voltage components is critical to avoid excessive electric stress on the insulation and thus reducing the risk of insulation breakdown and damage to equipment. For subsea applications this is even more important due to the costs involved in ... 詳細を見る

Kiran received his M. S. from Indian Institute of Science, Bangalore and his Ph.D. from University of Sheffield, both in Chemical Engineering. He is currently working as a Senior Researcher at the General Motors R&D, India Science Lab, Bangalore where he is involved in modeling of ... 詳細を見る

Thin glass sheets have nowadays a lot of commercial applications. An optimal functionality of the production of such glass sheets depends on the flow control of the molten glass. The uniform distribution of the molten glass to sheets of exact thickness and width depends on the geometry ... 詳細を見る

This paper investigates a hybrid winding concept for a toroidal inductor by simulating the winding resistance as a function of frequency. The problem of predicting the resistance of a non-uniform and complex winding shape is solved using 3D Finite Element Modeling. A prototype is built ... 詳細を見る

An optimization routine is presented to optimize a hybrid winding geometry for a toroid inductor in terms of the DC-resistance. The hybrid winding geometry consist of bended foil pieces connected through traces in a PCB. MATLAB® is used to create a GUI that visually plots the winding ... 詳細を見る

The accurate estimate of values of electromagnetic parameters are essential to determine the final circuit speeds and functionality for designing of high-performance integrated circuits and integrated circuits packaging. In this paper, the quasi-TEM analyses of symmetrical triple coupled ... 詳細を見る

The proton exchange membrane is a key component in the currently widely studied Proton Exchange Membrane Fuel Cells. In this paper a fully coupled three-dimensional dynamic numerical model of the membrane including all the physically relevant phenomena, i.e. ion transport, hydration ... 詳細を見る

COMSOL Multiphysics can be used to model a latent heat energy storage system. A 2D numerical study was performed to simulate melting of a PCM including both conduction and convective heat transfer. The heat transfer in fluids and laminar flow physics interfaces were used. To model ... 詳細を見る

Using modeling software such as COMSOL Multiphysics during the design phase, an approach called “simulation-led design”, allows ideas to be both inspired and validated by the use of simulations. Then, using simulations after the product is designed can shorten the prototype-testing ... 詳細を見る