研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL Conference 2024 論文集を見る
Designing and constructing a lab-on-a-chip device poses a variety of questions. Transport of all required substances, detection of the analyte and its deposition on a sensor have to be incorporated. Different strategies have been developed to achieve good coverages of the sensor, like ... 詳細を見る
The core of this modelling is to study heat transfer and fluid dynamics processes for a compression expansion system, and the main particularity is that heat transfer and air movement are due to the movement of the piston. We have implemented a \"moving mesh\" solver to compute the ... 詳細を見る
“页岩气革命”使美国成功摆脱了对他国能源的严重依赖，目前我国页岩气的勘探开发也已取得了突破性成果，但是随着页岩气的开发，仍存在三大问题困扰着科学工作者和现场工程师：（1）页岩气开发过程中的渗透率演化规律尚未摸清；（2）在产气过程中，页岩气在产量上往往呈现出不确定性；（3）缺乏针对页岩气进行历史拟合和产量预测的数学工具。针对以上三个主要问题，我们定义非常规储层固有渗透率的演化是裂隙和基质之间物质传输和应力传递的结果，并建立了离散体模型研究孔隙变形与流体流动之间的耦合作用；以此为基础，我们建立双基质双重孔隙介质模型（连续介质模型）研究页岩基质变形与流体流动之间的耦合关系 ... 詳細を見る
Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium fuel are ongoing at ORNL as part of an effort sponsored by the U.S. Global Threat Reduction Initiative program. HFIR is a very high flux, ... 詳細を見る
Excessive air damping can be detrimental to the performance of oscillating MEMS components. Complex systems, such as structures in pre-etched cavities or angular comb-drive scanning mirrors, typically require simulations to reliably evaluate the air damping. The simulated and ... 詳細を見る
COMSOL Multiphysics® is used to simulate a thermal transport based flow sensor, which will be embedded in a micro-channel of a Poly-methyl methacrylate (PMMA) based microfluidic device. The channel height is 100μm and for simulation purposes the lengths has been set to 1.2mm. The heater ... 詳細を見る
Comprehensive studies of drug transport in nanofibres based mats have been performed to predict drug release kinetics. The paper presents our approach to analyze the impact of fibers arrangement, one of the parameters varied in our parallel experimental studies. COMSOL Multiphysics® has ... 詳細を見る
We demonstrate a simple example about how to design my own algorithm for Navier-Stokes equation by weak form PDE and LiveLink™ for MATLAB®. After the computation, we get the same solution as other FEM packages (FreeFEM++ & FeniCs) at each iterative step, and we can see the Navier ... 詳細を見る
Huang-Ming Lee received his BS and MS degrees in Physics from National Changhua University of Education, Taiwan, in 1999 and 2001, respectively and PhD degree in Materials Science and Engineering from National Chiao Tung University, Taiwan, in 2006. He is currently a postdoctoral fellow ... 詳細を見る
This study presents a rotordynamic analysis of a rotor on hydrodynamic bearings using COMSOL Multiphysics®. In this paper, the complexity of the model is gradually increased. Starting point of the analysis is the modal analysis of the rotor in free-free conditions. A Reynolds model is ... 詳細を見る
