技術情報とプレゼンテーション

Deformation prediction is an important part of the structure stability analysis. However, the deformation of bank protection structure which is affected by many factors, such as structural stiffness, earth pressure and hydrostatic pressure. It contains a complex mechanical process, which ... 詳細を見る

In the last decades, the topic of microfluidic Electroosmotic Pumps (EOP) gained the attention of scientists all over the world. One of the greatest advantages of the electroosmotic pumps is the fact, that there are no moving parts. With the effect of electro osmosis, it is possible to ... 詳細を見る

Different facilities for hadrontherapy have been built in the recent past. AISHa ion source has been designed by keeping in mind the typical requirements of hospital-based facilities, where the minimization of the mean time between failures (MTBF) is a key point together with the ... 詳細を見る

The high flow rate within the HFIR cooling water flow channel causes the fuel plates to deflect which in turn, changes the coolant flow characteristics. This nonlinear feedback loop between the coolant and the fuel plate is the focus of the present simulation of the fluid-solid ... 詳細を見る

This paper introduces an efficient model to describe energy dissipation in acoustic. When the propagation domain has hard wall boundary conditions only viscous and thermal losses happen and are completely described by the so-called Full Linearized Navier-Stokes model (FLNS) which is ... 詳細を見る

Within a borehole a nozzle can be installed in order to increase the efficiency of fluid injection. The position of the nozzle is located near the perforated casing of an injection well. A COMSOL Multiphysics® model is set up for a typical nozzle design as applied in practice. The model ... 詳細を見る

Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... 詳細を見る

In climates with high temperature and solar radiation, reducing the cooling consumption and increasing the standards of indoor comfort are topics of great importance. The roof plays a key role in controlling the indoor thermal comfort. In ventilated roofs, air flow within the ASV (Above ... 詳細を見る

In the following study COMSOL Multiphysics® was used to simulate evaporation of water droplets in a stream of heated air. This was a precursor to the modeling of a humidifier, which is used to humidify the air supplied to fuel cell stack. Since the percentage of water droplets was ... 詳細を見る

The paper presents a method of extraction of electrical equivalent circuit of a one port surface acoustic wave (SAW) resonator from the results of simulation based on finite element method (FEM) using COMSOL Multiphysics software. A one port SAW resonator consists of large number of ... 詳細を見る