研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL Conference 2024 論文集を見る
Pulsed DC technology has led to the design of cost-effective deposition systems and to improved film properties, compared to conventional rf systems. In this work, a two-dimensional finite element model is used to investigate the high frequency pulsed DC discharges in nitrogen. The study ... 詳細を見る
Small-scale plasma jets in atmospheric air can produce regions of highly reactive chemistry coincident with temperatures approaching room temperature allowing his type of cold plasma jet to be used for decontamination of surfaces and sterilization of living tissue. In the device under ... 詳細を見る
Standard approaches to reproduce the coupling of wave propagation and plasma transport inside a helicon plasma source rely on electromagnetic simulations coupled to either kinetic or particle-in-cell strategies to reproduce the plasma response. If the plasma density reach values higher ... 詳細を見る
Inductively Coupled Plasma Chemical Vapor Deposition (ICPCVD) has been widely used for carbon-based nanomaterial synthesis because it provides high plasma densities and uniform plasma distribution and allows plasma to be generated in room temperature.[1] During the ICPCVD process, the ... 詳細を見る
手性等离激元纳米结构被广泛研究并用于生物监测、分析化学和负折射率介质方面。在该结构中直接耦合的机制已经在相关研究中被发现。我们提出由金膜分隔两个金纳米棒(TNMF)的结构(图1)，并发现了间接耦合机制。 在 COMSOL Multiphysics® 中，射频电磁波，频域接口用于求解正弦时变电磁场分布，选此接口计算 TNMF 结构的光学响应。插值函数用来设置金的折射率；设置边界条件模拟周期性结构阵列。结果可通过端口2对端口1的响应获得，并可查看每个数据点的电场、电荷等分布。应用程序库中射频模块的“Plasmonic wire grating ... 詳細を見る
In our project, we propose an innovative software solution to the problem of electrical arcing risk prediction in high-voltage on-board electronic equipment intended for long-term self-contained use, e.g. in spacecraft conditions. It completely based on so-called “decomposition” approach ... 詳細を見る
High power CO2 lasers have been the workhorses for sheet metal cutting, welding and many more applications in materials processing during the past decades. Even though a significant replacement by fiber coupled lasers takes place, there are still many applications that benefit from the ... 詳細を見る
The lamination of substrates with thin coatings is commonly used in furniture, automotive and avionic industries. In the lamination process the hot melt adhesives are widely used and typically activated at temperatures from 80°C to 140°C by resistive heating. This requires a heat ... 詳細を見る
Plasma torches are used in processing of materials as well as in the energy industry for producing plasma. In a non-transferred arc plasma torch, an electric arc can be initiated by applying a direct current (DC) between the cathode and anode, both placed inside the torch. Then, the ... 詳細を見る
Fusion devices (tokamaks, stellarators) require hundreds of millions degree Celsius temperature to reach the plasma state when the fusion reactions start to occur. Ion cyclotron resonance heating (ICRH) is a method of energy transfer to the ions in the plasma from electromagnetic ... 詳細を見る