研究開発におけるマルチフィジックスシミュレーションの具体例

さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.


COMSOL コンファレンス 2020 論文集を見る

Structural Mechanics and Thermal Stressesx

Laser-Ultrasonics Wave Generation and Propagation FE Model in Metallic Materials

A. Cavuto[1], G.M. Revel [1], M. Martarelli [2], F. Sopranzetti [2]
[1]Università Politecnica delle Marche, Ancona, Italy
[2]Università e-Campus, Novedrate (CO), Italy

A 2D axisymmetric model was considered in order to evaluate the propagation paths of the ultrasonic waves generated inside an aluminum plate sample due to a rapid thermal expansion produced by laser pulse. Laser Doppler Vibrometer is used to experimentally validate the numerical results ... 詳細を見る

Lamb Waves in Fluid-Loaded Plates

T. Kaufmann[1], F. Kassubek[1], D. Pape [1], M. Lenner[1]
[1]ABB Corporate Research, Baden-Dättwil, Switzerland

Lamb waves are elastic waves propagating in free solid plates. In the case of plates loaded with a fluid, the equations describing these waves have to be modified to include the effects of the fluid. In our work we have tackled this problem using COMSOL Multiphysics®. We have used the ... 詳細を見る

COMSOL Multiphysics® Simulations of Cracking in Point Loaded Masonry with Randomly Distributed Material Properties

A.T. Vermeltfoort[1], A.W.M. van Schijndel[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

This paper describes COMSOL Multiphysics® simulations of the stress and crack development in the area where a masonry wall supports a floor. In these simulations one of the main material properties of calcium silicate, its E-value, was assigned randomly to the finite elements of the ... 詳細を見る

Computing the Influence Functions of an Adaptive Optics Large Deformable Mirror: the Numerical Method and the Experimental Data

R. Biasi[1], D. Gallieni[2], A. Riccardi[3], R. Briguglio[3], C. Del Vecchio[3]
[1]Microgate Srl, Bolzano, Italy
[2]ADS International Srl, Valmadrera (LC), Italy
[3]National Institute for Astrophysics - Arcetri Astrophysical Observatory - Firenze, Italy

Adaptive Optics units are mounted on many large telescopes, thus enabling diffraction-limited astronomical images through compensation of the effects of atmospheric turbulence. The design of the control system of the Deformable Mirror includes a feed-forward block, aimed for increasing ... 詳細を見る

A Computational Approach for Simulating p-Type Silicon Piezoresistor Using Four Point Bending Setup

T.H. Tan[1], S.J.N. Mitchell[1], D.W. McNeill[1], H. Wadsworth[2], S. Strahan[2]
[1]Queen's University Belfast, Belfast, United Kingdom
[2]Schrader Electronics Ltd, Antrim, United Kingdom

The piezoresistance effect is defined as change in resistance due to applied stress. Silicon has a relatively large piezoresistance effect which has been known since 1954. A four point bending setup is proposed and designed to analyze the piezoresistance effect in p-type silicon. This ... 詳細を見る

Virtual Prototyping of a Microwave Fin Line Power Spatial Combiner Amplifier

A. Leggieri[1], F. Di Paolo[1], D. Passi[1]
[1]University of Rome "Tor Vergata" - Department of Electronic Engineering, Rome, Italy

This paper describes the Virtual Prototyping based on a COMSOL Multiphysics® simulation for a novel Microwave Fin Taper (FT) Spatial Power Combiner (SPC) Amplifier. The analyzed system is waveguide (WG) based, and uses FT Probes to convert the energy of a rectangular WG EM fundamental ... 詳細を見る

The Use of COMSOL Multiphysics® for Studying the Fracture Pressure of Rectangular Micro-Channels Embedded in Thin Silicon Substrates

K. Howell[1], H. Georgiou[2], P. Petagna[3], G. Romagnoli[3]
[1]George Mason University, Fairfax, VA, USA
[2]Cyprus University of Technology (C.U.T), Limassol, Cyprus, EU
[3]CERN - The European Organization for Nuclear Research, Geneva, Switzerland, EU

The thermal management of silicon detectors and related electronics through micro-structured silicon cooling plates is gaining considerable attention for high precision particle trackers. Micro-fluidic circuits are etched in a silicon wafer, which is then bonded to a second wafer to ... 詳細を見る

Novel Simulation of a Voltage-Driven Electro-Thermo-Mechanical MEMS Self-Oscillator

S. Ouenzerfi [1,2,3], H.A.C. Tilmans [2], S. El-Borgi[3,4], X. Rottenberg [2]
[1] KACST-Intel Consortium Center of Excellence in Nano-manufacturing Applications (CENA), Riyadh, KSA
[2] IMEC, Leuven, Belgium
[3] Applied Mechanics and Systems Research Laboratory, Tunisia Polytechnic School, University of Carthage, La Marsa, Tunesia
[4] Texas A&M University at Qatar, Mechanical Engineering Program, Engineering Building, Doha, Qatar

This paper presents the modeling and simulation of electro-thermo-mechanical self-oscillators, an emerging type of M/NEMS-enabled timing devices in which sustaining electronic amplifiers are not required for their operation. Indeed, they realize amplification in the mechanical domain and ... 詳細を見る

Nonlinear Computational Homogenization Experiments

G.E. Stavroulakis[1], K. Giannis[1], G.A. Drosopoulos[2], M.E. Stavroulaki[1]
[1]Technical University of Crete, Chania, Greece
[2]Leibniz University, Hannover, Germany

Numerical homogenization is based on the use of finite elements for the description of average properties of materials with heterogeneous microstructure and composites. The Representative Volume Element (RVE) of a masonry is solved with COMSOL Multiphysics®. It consists of linearly ... 詳細を見る

Key-Holes Magnetron Design and Multiphysics Simulation

A. Leggieri[1], F. Di Paolo[1], D. Passi[1]
[1]Univeristy of Rome "Tor Vergata" - Department of Electronic Engineering, Rome, Italy

This paper describes the design and characterization of an 8 slots resonant cavity Magnetron, which undergoes thermal-structural effects due to cathode heating. The proposed study involves Thermal Stress, Eigen-frequency and Particle Tracing analysis based on COMSOL Multiphysics®. ... 詳細を見る