研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL コンファレンス 2020 論文集を見る
Fluid Structure Interaction Applied to Upper Aorta Blood Flow
This work deals with the computer simulation of the blood flow, the arterial wall deformation and their 3D bidirectional interaction, including initial stresses and root displacements. The flow is laminar and steady with flexible walls modeled with a hyperelastic Demiray material model. ... 詳細を見る
Simulation of Thermal Sensor for Thermal Control of Satellite Using COMSOL Multiphysics
The actuator comprises of a temperature sensitive composite deflecting beam, a piezoelectric substrate and a field effect transistor. The temperature rise causes an expansion in the composite beam thereby causing it to deflect. The deflecting beam impinges on the piezoelectric crystal ... 詳細を見る
Multiscale Damage Detection in Conductive Composites
Conductive Composites such as carbon fiber reinforced composites are increasingly used in safety critical aerospace applications. The catastrophic macro structural failure of composite structures initiates from a micro level failure event such as fiber breaks. The ability to detect ... 詳細を見る
Micro Mechanical Exploration of Composites for Superior Properties
The predictive engineering of materials is matured from predicting properties from known morphology or constituents to engineering novel morphology for superior properties. The focus of this paper is about implementation of computational material mechanics modeling method in COMSOL ... 詳細を見る
Influence of Vickers Indenter Tip Geometry on the Macro-indentation Properties of TiAl Alloys
In this work the influence of the geometry of the Vickers indenter tip on relevant indentation properties is investigated during instrumented indentation operated in the macro range (i.e. with forces ranging from 2 to 200 N) and carried out in the case of a homogenized (i.e. heat ... 詳細を見る
Densification and Shape Change of Calcined High Level Waste During Hot-Isostatic Pressing
Hot Isostatic Pressing (HIP) has been selected as a means of treating calcined high level waste (HLW). The process combines high temperature and pressure to densify the HLW in to a mineral similar to the geologic formulation of granite. This study uses COMSOL to predict densification ... 詳細を見る
Stress Analysis of an Electromagnetic Horn
An electromagnetic horn is a device used in particle physics to produce a strong pulsed toroidal magnetic field and to focus charged particles toward a detector. A multiphysics analysis is performed to assess the stress level inside the horn structure. In steady state regime, the horn ... 詳細を見る
Numerical modelling of the damage potential of climate variations to a historic wooden cabinet
The two wooden cabinets of Jan van Mekeren that are located in Amerongen Castle show comparable wood damage; in particular large cracks in the cabinet doors are clearly noticeable. It is assumed that these cracks were caused by bad indoor climate conditions in the castle. Combined ... 詳細を見る
Finite Element Approach for the Analysis of the Fuel Cell Internal Stress Distribution
A fuel cell stack is a setup of a number of single fuel cells which have to be mechanically compressed each other to ensure good electrical conductivities and tightness against leakage of supplying gases (e.g. hydrogen) and cooling media. In this study a 3D FEM model is developed with ... 詳細を見る
Modeling of Chemo-Mechanical Coupled Behavior of Cement Based Material
A lixiviation-mechanical coupled model is developed for fiber reinforced concrete within this framework; both the influence of chemical degradation on short and long term mechanical behavior and the influence of mechanical loading on the diffusion coefficient can be considered. The ... 詳細を見る