Menu

Discussion Forum

New Discussion
フィルター

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Transfer

Posted 2025/03/23 20:52 GMT-4 1 Reply

Badran Salim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi every one I would like to inqure how i can cancel the thermal insulation that construct automatically between two different physics in COMSOL for heat transfer

1 Reply Last Post 2025/03/23 21:32 GMT-4
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 2025/03/23 21:32 GMT-4
Updated: 6 months ago 2025/03/23 21:33 GMT-4

You appear to be asking about setting a boundary condition. Is that right? If so, I suggest you post your .mph file to the forum and: (1) identify the specific boundary in question, and (2) explain what boundary condition you are trying to apply to there. I am fairly confident that if you do that, someone here will be able to help you.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
You appear to be asking about setting a boundary condition. Is that right? If so, I suggest you post your .mph file to the forum and: (1) identify the specific boundary in question, and (2) explain what boundary condition you are trying to apply to there. I am fairly confident that if you do that, someone here will be able to help you.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content