Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Flux Linkage
Posted 2010/04/26 6:37 GMT-4 0 Replies
Please login with a confirmed email address before reporting spam
I have a 3 phase tubular permanent magnet machine, modeled in the 2D axial symmetry option. The coils (copper) are mounted between the two stator teeth and stator back-iron. The phases are respectivily:
Phase A) 1st 4th and 8th stator slots
Phase B) 2nd 5th and 9th stator slots
Phase C) 3rd 6th and 10th stator slots
How can I measure the flux linkage of each coil or each phase?
Best Regards!
Hello João Sousa
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.