アプリケーションギャラリには電気, 構造, 音響, 流体, 熱および化学分野に関連する COMSOL Multiphysics® チュートリアルおよびデモアプリファイルが用意されています. これらの例はチュートリアルモデルまたはデモアプリファイルとそれに付随する手順をダウンロードすることにより独自のシミュレーション作業の開始点として使用できます.
クイック検索機能を使用して専門分野に関連するチュートリアルやアプリを検索します. MPHファイルをダウンロードするには, ログインするか, 有効な COMSOL ライセンスに関連付けられている COMSOL アクセスアカウントを作成します. ここで取り上げた例の多くは COMSOL Multiphysics® ソフトウェアに組み込まれ ファイルメニューから利用できるアプリケーションライブラリからもアクセスできることに注意してください.
A fuel cell stack operates at temperatures just below 100 °C, which means that it has to be heated at start-up. The fuel cell stack consists of unit cell of anode, membrane, and cathode connected in series through bipolar plates. This study presents a model that couples the thermal and ... 詳細を見る
このチュートリアルでは, 高分子電解質膜 (PEM) 燃料電池スタックの熱管理をモデル化します. すべてのセルの温度分布を均一に保ってスタックを動作させることが重要です. 温度分布が不均一だと, 水蒸気の凝縮が不均一になり, セル間の性能差が大きくなる可能性があるためです. スタックは5つのセルで構成され, 各セルは液体冷却流体を運ぶバイポーラープレートで層状に挟まれています. このモデルは, 温度, 電極と電解質の相間電位, 各ガスコンパートメントにおける反応種の質量輸送, ... 詳細を見る
This example extends the Fuel Cell Cathode tutorial to also include liquid water transport in the oxygen electrode. Liquid water is produced using a user-defined expression for vapor condensation, depending on the relative humidity level in the gas phase. An experimental capillary ... 詳細を見る
A fuel cell unit cell is modeled using the full Butler-Volmer expression for the anodic and cathodic charge transfer reactions. The anodic and cathodic overpotentials depend on the local ionic and electronic potentials, which are obtained from the charge balance equations for ionic and ... 詳細を見る
In this model of an ammonia-fed solid oxide fuel cell, the required hydrogen is supplied through endothermic thermal decomposition of ammonia. The model includes the full coupling between the mass balances and gas flow in the H2 and O2 gas diffusion electrodes, the momentum balances in ... 詳細を見る
This model presents a study of the current density distribution in a solid oxide fuel cell (SOFC). The model includes the full coupling between the mass balances at the anode and cathode, the momentum balances in the gas channels, the gas flow in the porous electrodes, the balance of ... 詳細を見る
This tutorial demonstrates how to use stationary polarization data to perform parameter estimation of a polymer electrolyte membrane fuel cell (PEMFC) model. The model, defining a 5-layer membrane electrode assembly (MEA) is two-dimensional and includes electronic and ionic charge ... 詳細を見る
A stationary 3D model of a generic fuel cell cathode describing the mass fraction distribution of oxygen, water, and nitrogen, as well as the current distribution. The model uses Darcy's Law to describe convection, and couples this to Maxwell-Stefan diffusivities to also describe mass ... 詳細を見る
このチュートリアルでは, 高分子電解質膜 (PEM) 燃料電池における相互に関連した電気化学反応, 電荷および化学種の輸送, そして熱伝達をモデル化します. ガス流路については, 水素アノード側には直線状の流路を, 空気カソード側にはメッシュ構造を使用します. セルは, 別の流路を流れる冷却流体によって冷却されます. 上部境界と下部境界には周期的な温度境界条件を適用し, 積層セル構成をエミュレートします. このモデルには, 電気浸透輸送 (抵抗) とメンブレインを介した水の透過も含まれています. 詳細を見る
In a polymer electrolyte membrane fuel cell (PEMFC), water is produced at the cathode. The cell is also fed with water vapor via the inlet gas streams, in order to keep the polymer electrolyte membrane humidified. If the water partial pressure in the gas phase exceeds the vapor ... 詳細を見る