アプリケーションギャラリ

このモデルは, 互いに等距離に配置された GaAs 柱で構成されるフォトニック結晶における波動伝播を調査します. 柱間の距離は, 光の波数と周波数の関係を決定し, 特定の波長の光が結晶構造内を伝播するのを防ぎます. この周波数範囲はフォトニックバンドギャップと呼ばれます. 特定の構造には複数のバンドギャップがあり, このモデルは結晶の最低周波数帯域のバンドギャップを抽出します. バンドギャップ解析には, 主に2つの複雑な問題があります. 1つは, GaAs の屈折率が周波数に依存することです. 2つ目は, ... 詳細を見る

At the macroscopic level, systems usually mix fluids using mechanical actuators or turbulent 3D flow. At the microscale level, however, neither of these approaches is practical or even possible. This model demonstrates the mixing of fluids using laminar-layered flow in a MEMS mixer. This ... 詳細を見る

Many complex fluids of interest exhibit a combination of viscous and elastic behavior under strain. Examples of such fluids are polymer solutions and melts, oil, toothpaste, and clay, among many others. The Oldroyd-B fluid presents one of the simplest constitutive models capable of ... 詳細を見る

This example models the flow and mass transport in the channels and the gas diffusion layer (GDL) of a polymer electrolyte fuel cell. The cathode electrode reaction is modeled as a boundary condition, where the local current density depends on the overpotential and the local oxygen ... 詳細を見る

The model simulates non-premixed turbulent combustion of syngas (synthesis gas) in a simple round-jet burner. Syngas is a gas mixture, primarily composed of hydrogen, carbon monoxide and carbon dioxide. The name syngas relates to its use in creating synthetic natural gas. In the model, ... 詳細を見る

Continuous mixing is used in process equipment to mix components in a single pass. Compared to batch mixing, this operation has the advantage that the tank filling and emptying steps are eliminated, implying that the process can be run without interruptions. A disadvantage of continuous ... 詳細を見る

Oxide jacking is the process by which reinforced concrete cracks, due to the corrosion of the reinforcing rebar rods. The corrosion process causes growth of an oxide layer on the rebar, which in turn causes internal stresses in the concrete. If the corrosion process is allowed to ... 詳細を見る

This example presents a homogenized model of a corrugated sheet based on a unit cell approach. The numerically obtained equivalent stiffness matrices are compared with various analytical models. Two corrugation profiles, trapezoidal and round, are considered in this example. 詳細を見る

This tutorial demonstrate the use of a Cross Grating feature in an échelle spectrograph. A cross grating is a periodic surface with two directions of periodicity. In this model the cross grating is used in high order in one direction and in first order in the orthogonal ("cross") ... 詳細を見る

この例では, 静電インターフェースを使用して, 一般的な高電圧絶縁体の表面電場を計算する方法を示します. グレーディングリングを設置すると, 表面電場の不均一性と最大値が大幅に減少することが示されています. このようにして, 高電圧絶縁体はより高い過電圧に耐えることができます. 詳細を見る