アプリケーションギャラリ

This app demonstrates the following: Dynamic help system using card stacks Multiple components (1D and 3D) in a single app Toggle buttons in the ribbon for showing different input, hiding/showing geometry selections, and for dynamic help Geometry parts and parameterized geometries ... 詳細を見る

このモデルは, COMSOL Multiphysics を使用して, 異なる次元で定義された現象を完全に連成した方法でモデル化する方法を示しています. ほとんどの場合, 反応速度式は反応物と生成物の濃度の関数として定義されますが, 吸着反応では活性部位または表面複合体の表面濃度もモデル化する必要があります. これは, リアクターのバルク内の質量バランスを, デバイスの表面のみに存在する種の質量バランスと結合する必要があることを意味します. このデバイスは, 触媒, バイオチップ, 半導体部品, または表面固有の化学種を含む任意のプロセスである可能性があります. ... 詳細を見る

Basin-type insulators are critical components in Gas-Insulated Metal-Enclosed Switchgear (GIS). During the manufacturing process, the curing of epoxy resin can generate residual stresses that may lead to the formation of cracks. Over time, these cracks can cause partial discharges, ... 詳細を見る

Thermal management has become a critical aspect of today’s electronic systems, which often include many high-performance circuits that dissipate large amounts of heat. Many of these components require efficient cooling to prevent overheating. Some of these components, such as processors, ... 詳細を見る

This tutorial model solves for an inductively coupled plasma reactor with RF bias (also known as ICP/CCP reactors) in a mixture of argon/chlorine. The model computes the fluid flow and gas heating. Important aspects and strategies for modeling electronegative discharges are discussed. 詳細を見る

This verification model uses the Electromagnetic Waves, Boundary Elements interface to simulate the RCS of perfectly conducting sphere. The simulated result is compared to analytical calculation to verify the accuracy. 詳細を見る

このモデルは, 特定の材料特性セットに対するリチウムイオン電池の放電と充電を解析するためのリチウムイオン電池インターフェースを示します. ジオメトリは1次元で, モデルは等温です. 電池開発者は, このモデルを使用して, 材料, 寸法, 活性材料の粒度分布 (この場合は負極の炭素と正極のリチウムマンガン酸化物 (LiMn2O4) の選択など, さまざまな設計パラメーターの影響を調べることができます. また, 携帯電話やラップトップコンピューターなど, さまざまな動作条件やさまざまなデバイスでの電池性能をシミュレートすることもできます. 詳細を見る

This classical verification model solves the steady state temperature distribution in a plan disk heated by a localized heat source at its center. It shows and compare different ways to define a heat source localized on a small domain by representing it either as a geometrical point or a ... 詳細を見る

The dipole antenna is one of the most straightforward antenna configurations. It can be realized with two thin metallic rods that have a sinusoidal voltage difference applied between them. The length of the rods is chosen such that they are quarter wavelength elements at the operating ... 詳細を見る

This example considers the natural convection of air above a smoldering incense stick. This kind of flow often shows a transition from laminar to turbulent which is nicely visualized by the smoke produced by the slow burning of the incense. The model uses the Nonisothermal Flow, LES RBVM ... 詳細を見る