技術情報とプレゼンテーション

This article is the result of a hobby project. The article is going thru the iterative developing process of a claw pole machine. In this developing process, simulating the magnetic flux density and back EMF waveform have been used to validate geometrical changes to the machine. 詳細を見る

Adsorption heat exchangers (AdHXs) are important components in adsorption heat pumps and chillers, a primary energy efficient source of heating and cooling. Due to availability and established inexpensive manufacturing fin-and-tube type heat exchangers with beds of adsorption pellets in ... 詳細を見る

Electromagnetic actuators are representing one important component of ABB's medium voltage reclosers [1, 2]. Their performance is strongly influenced by the considered material properties as well as by the electronic control units that will power the actuator. Depending on the studied ... 詳細を見る

A recurring problem, in heat assisted magnetic recording is the build-up of thermal energy in the near-field transducer leading to NFT deformation and the cessation of operation. A mechanism to dissipate this excess heat in the NFT without greatly effecting its’ plasmonic response is ... 詳細を見る

Electropolishing is an electrochemical process that radiofrequency accelerating cavities undergo in order to improve their inner metal surface finishing. This is performed prior to their installation into particle accelerators, in order to enhance their accelerating properties. Using ... 詳細を見る

MRI relies upon a static magnetic field which creates a net magnetic moment from proton spins and radio-frequency fields are generated to excite this magnetic moment into a perpendicular plane, where it can be detected through the use of an array of conductive loops. The optimal size ... 詳細を見る

The design of windows and or other perforated structures which allow the free flow of air into & out of a building or system, while being fully soundproofed or attenuate certain frequencies is of great interest to architects and design engineers, where sound as a longitudinal wave, ... 詳細を見る

RFID tags are ever increasing in their daily use, from the monitoring of components, the tracking of produce during processing & production, as well as being used in much of the touch-less technologies seen today. With this technology, there has been the ever increasing need to ... 詳細を見る

CV boots or gaiters are rubber like material used to cover & protect moveable or articulating components such as CV joints of a vehicle. These are primarily used to protect the articulating joint, by preventing the components from being exposed to the surrounding environment, the ... 詳細を見る

The application of super-alloys has grown up in numbers in the industries like aerospace, automotive, nuclear, thermal power plant & medical implants. The initial cost of prototyping and the selection of suitable manufacturing methods & test fixtures made by electrochemical ... 詳細を見る