研究開発におけるマルチフィジックスシミュレーションの具体例
さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.
COMSOL コンファレンス 2020 論文集を見る
Fluid Motion Between Rotating Concentric Cylinders Using COMSOL Multiphysics® Software
Introduction Fluid flow patterns in research or process-scale equipment where a fluid is contained between concentric rotating cylinders in the absence of bulk axial flow has received notable attention in the field of fluid mechanics. Annular flows occur in many practical applications, ... 詳細を見る
Hydrodynamic Modeling of a Rotating Cone Pump Using COMSOL Multiphysics® Software
Introduction Velocity profiles in liquid films flowing over rotating conical surfaces are of considerable interest in industry. The efficiency of important process equipment, such as spinning cone columns, fluid degassers, centrifugal disc atomizers, centrifugal film evaporators, and ... 詳細を見る
Control the Poly-Dispersed Droplet Breakup Mode in a Droplet-based Microfluidic Device by External Electric Field
Droplet–based microfluidics has received special research attentions in last two decades due to its superior control over fluid flow as well as other unique advantages[1]. By introducing two immiscible fluids into microfluidic systems, the reagent fluid is encapsulated inside discrete ... 詳細を見る
FEM Convergence for PDEs with Point Sources in 2-D and 3-D
Numerical theory provides the basis for quantification of the accuracy and reliability of a FEM solution by error estimates on the FEM error vs. the mesh spacing of the FEM mesh. This paper presents techniques needed in COMSOL Multiphysics® software to perform computational studies for ... 詳細を見る
Advanced Multiphysics Thermal Hydraulic Models for the High Flux Isotope Reactor
Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium fuel are ongoing at ORNL as part of an effort sponsored by the U.S. Global Threat Reduction Initiative program. HFIR is a very high flux, ... 詳細を見る
Preliminary Study of Particle Trajectory and Secondary Flow in Bend Configurations to Reduce Erosion
To the best of our knowledge, only few researchers have made attempts to minimize the erosion in bends by modifying the bend configuration in order to alter the particle-laden flow pattern to reduce the erosion. In this work, we revisited those previously proposed bend configurations to ... 詳細を見る
Permeability in Fragmented Materials and its Application to Underground Mining
The block caving mine is considered by the mining industry as one of the natural replacements of the current open cut mines in the near future. The block caving technique is based on the extraction of small broken rocks, created by blasted initially large solid rocks, and the fracture of ... 詳細を見る
CFD Analysis of a Printed Circuit Heat Exchanger
In this experiment, the performance of a Printed Circuit Heat Exchanger (PCHE) was studied using COMSOL Multiphysics® software. PCHEs are diffusion bonded heat exchangers containing semicircular, chemically etched flow paths. Helium was used as the working fluid on both the hot and cold ... 詳細を見る
Modeling Conventional Swing of a Cricket Ball
Conventional swing is one phenomenon which a bowler uses to gain an advantage over the batsman. This study involved simulating conventional swing in the CFD Module of COMSOL Multiphysics® software and comparing the simulated results with experimental results of previous researchers. The ... 詳細を見る
Modeling of Stockton University Geothermal System Using COMSOL Multiphysics® and the Subsurface Flow Module
Stockton University has one of the largest closed loop geothermal system in North America. It provides heating and cooling for the university academic facilities. The well field comprises of a grid of four hundred wells bored to a depth of 130m. The ground is composed of three aquifers ... 詳細を見る