技術情報とプレゼンテーション

クイック検索

資料

ホワイトペーパーとアプリケーションノート

研究開発におけるマルチフィジックスシミュレーションの具体例

さまざまな業界のエンジニア, 研究者, 科学者がマルチフィジックスシミュレーションを使用して革新的な製品の設計とプロセスを研究および開発しています. COMSOL カンファレンスで発表したテクニカルペーパーやプレゼンテーションからインスピレーションを得てください. 以下の選択項目を参照するか, クイック検索ツールを使用して特定のプレゼンテーションを検索するか, アプリケーション領域でフィルタリングします.

COMSOL コンファレンス 2020 論文集を見る

すべて

Bengaluru 2023

ヨーロッパ 2020

MEMS and Nanotechnologyx

Empirical Model Dedicated to the Sensitivity Study of Acoustic Hydrogen Gas Sensors Using COMSOL Multiphysics®

A. Ndieguene[1], I. Kerroum[1], F. Domingue[1], A. Reinhardt[2]
[1]Laboratoire des Microsystèmes et de Télécommunications/Université du Québec à Trois-Rivières, Trois-Rivières, QC, Canada
[2]Laboratoire d’Électronique et des Technologies de l’Information, CEA, LETI Grenoble, France

Due to the increasing demand for hydrogen gas sensors for applications such as automation, transportation, or environmental monitoring, the need for sensitive and reliable sensors with a short response time is increasing. This paper presents an empirical model that studies the ... 詳細を見る

Finite Element Analysis of BAW Sensor

M. Hashiguchi[1], Y. Sumiyoshi[1]
[1]Keisoku Engineering System Co., Ltd., Tokyo, Japan

Achieving passive device working over two GHz bands for next generation mobile phone has been strongly desired. This paper investigated the spurious mode suppression for the BAW resonator. The border-frame technique which has been proposed in many literatures is examined here ... 詳細を見る

Understanding the Role of Nanomaterials in DNA Biosensors Through Finite Element Analysis

J. C. Kumaradas[1], A. Zhang[2], Y. D. Davletshin[1]
[1]Ryerson University, Toronto, ON, Canada
[2]University of Waterloo, Waterloo, ON, Canada

Tremendous progress is being made in the integration of nanoparticles into micro-analytical systems for biosensing. These materials are shown to enhance the analyte capture capability of biosensing platforms. We have implemented a computational model that considers the sensor’s geometry, ... 詳細を見る

Effective Mass Calculations Using COMSOL Multiphysics® for Thermomechanical Calibration

B. D. Hauer[1], C. Doolin[1], K. S. D. Beach[1], J. P. Davis[1]
[1]University of Alberta, Edmonton, AB, Canada

Over the past few decades, nano/micro-mechanical resonators have experienced tremendous improvements in measurement sensitivity. In order to ensure accuracy, it is crucial that each nano/micro-mechanical device is properly calibrated. Thermomechanical calibration provides a noninvasive ... 詳細を見る

Effect of Fluid Conditions on Air-Liquid Interface in Hydrophobic Micro Textured Surface

S. Takahashi[1], S. Ogata[1]
[1]Tokyo Metropolitan University Hachioji City, Tokyo, Japan

We studied the influence of a number of gas-liquid interface on the drag reduction effect by numeric simulation. Level set method was used for an analysis of gas-liquid interface. The analytic model is rectangular channel of height h = 5 micrometer and width w = 20 micrometer with two ... 詳細を見る

Numerical and Experimental Evaluation for Measurement of a Single Red Blood Cell Deformability Using a Microchannel and Electric Sensors

K. Tatsumi[1]
[1]Kyoto University, Kyoto City, Kyoto, Japan

An electric micro-resistance sensor that can continuously measure the deformability of a single red blood cell (RBC) in a microchannel and a numerical model that can simulate the resistance and capacitance of the cell membrane and cytoplasm are developed and improved. The resistance ... 詳細を見る

Nanoscale Structure Design in EM Fields Using COMSOL Multiphysics

J. Yoo[1], H. Soh[2], J. Choi[3], S. Song[4]
[1]Department of Mechanical Engineering, Yonsei University, Korea
[2]Hyundai Motor Co., Korea
[3]Samsung Electronics Co., Ltd., Korea
[4]Mando Co., Korea

Nanoscale structural analysis and design is presented. All the simulations are carried out using a finite element solver and optimization is performed using parameter and topology optimization schemes. It is concluded that COMSOL is effective for analysis and design of nanoscale ... 詳細を見る

FEM-Simulation of a Printed Acceleration Sensor with RF Readout Circuit

H. Schweiger[1], T. Göstenkors[1], R. Bau[1], D. Zielke[1]
[1]Dept. Engineering Sciences and Mathematics, University of Applied Sciences Bielefeld, Bielefeld, Germany

In this paper we want to figure out the development of a capacitive acceleration-sensor system with the FEM-Method. The sensor-system is in the position to detect accelerations in the range of ±20 g. Furthermore the sensor-element contains a printed RF-inductance, which is used for ... 詳細を見る

Utilization of COMSOL Multiphysics' JAVA API for the Implementation of a Micromagnetic Modeling and Simulation Package with a Customized User Interface

L. Teich[1], A. Hütten[2], C. Schröder[1]
[1]Department of Engineering Sciences and Mathematics, Computational Materials Science & Engineering (CMSE), University of Applied Sciences Bielefeld, Bielefeld, Germany
[2]Department of Physics, Thin Films and Nanostructures, Bielefeld University, Bielefeld, Germany

One of the big advantages of COMSOL Multiphysics is the possibility to implement user-defined partial differential equations (PDE) which can be coupled to COMSOL\'s predefined physics interfaces. However, using the tool’s standard user interface requires manual implementation of the PDEs ... 詳細を見る

COMSOL Computational Fluid Dynamics for Microreactors Used in Volatile Organic Compounds Catalytic Elimination

M. Olea[1], S. Odiba[1], S. Hodgson[1], A. Adgar[1]
[1]School of Science and Engineering, Teesside University, Middlesbrough, United Kingdom

Volatile organic compounds (VOCs) are organic chemicals that will evaporate easily into the air at room temperature and contribute majorly to the formation of photochemical ozone. They are emitted as gases from certain solids and liquids in to the atmosphere and affect indoor and outdoor ... 詳細を見る

最初

前

261–270 of 531

次

最後