技術情報とプレゼンテーション

Electrochemical machining (ECM) is a manufacturing technology that allows metal to be precisely removed by electrochemical oxidation and dissolution into an electrolyte solution. ECM is suited for machining parts fabricated from “difficult to cut” materials and/or parts with complicated ... 詳細を見る

We have modeled surface acoustic wave (SAW) devices composed of piezoelectric materials: aluminum nitride (AlN), lithium niobate (LiNbO3), and quartz. These materials are often used in RF filters and wireless sensors, which require temperature compensation for stability. Using our COMSOL ... 詳細を見る

Of utmost importance in appliance design and manufacture are the features for protection from fire and for personal safety. Appliance engineers are continually in pursuit of better,longer-life appliances that will provide both lower cost to the consumer and lower energy consumption. ... 詳細を見る

Microfluidics is the science of manipulating and controlling fluids at the micron scale. Although, fluid flow in standard geometries can be determined easily by analytical methods, a more rigorous computational model is required for custom geometries. Achira’s microfluidics cartridge has ... 詳細を見る

A thermo-physical 3D model of a commercial Li-ion battery was developed and validated. Visualization of the temperature distributions inside a Li-ion cell during cell stacking processes were simulated. Critical temperature levels depend on position, duration and intensity of the thermal ... 詳細を見る

Piezoresistive pressure sensors have received much attention over the years because of low cost, simple measurement techniques, etc. There is a challenge in design with respect to appropriate positioning, shape and temperature compensation. Different models of piezoresistive pressure ... 詳細を見る

INTRODUCTION: Micro Electro Mechanical Systems (MEMS) are fabricated with an in-plane fabrication technology. Out-of-plane structures can be designed to be assembled to provide thermal and electrical isolation from the substrate [1 -3]. These isolations can potentially improve the ... 詳細を見る

Aluminum alloys in near-neutral, mildly aggressive solutions, undergo damage accumulation during corrosion, mostly due to the presence of micrometer-sized constituent intermetallic particles (IMP) that create a microstructural discontinuity at which localized corrosion occurs. The ... 詳細を見る

Dr. Christian Deville-Cavellin is a Research Engineer at Ugitech's Research Center, since 1995. Ugitech, member of the Schmoltz & Bickenbach group, is a stainless steel, long products producer. C. Deville-Cavellin is responsible for all research topics related to liquid metal ... 詳細を見る

The spindle is regarded as the heart of the CNC machine tool. Typically, the spindle is operated using the belt or gear drives to realize the relative motion between workpiece and cutting tool. However, they cannot be operated at high speeds due to power transmission losses, thus ... 詳細を見る