技術情報とプレゼンテーション

INTRODUCTION: The paper illustrates the use of COMSOL for obtaining the solution Ψ(x,y,t) as a solution to the time dependent nonlinear Schrödinger equation (NLSE). COMSOL previously was used to solve the time dependent NLSE in Ref.[1] as applied to quantum mechanics, however this is the ... 詳細を見る

Aluminum production potlines operate under significant amperage in a range of 200 kA – 600 kA. High electrical DC currents induce strong magnetic fields. MHD stability, which is a result of electrical current and magnetic field interaction within aluminum reduction cell, is one of highly ... 詳細を見る

This paper presents results on the visualisation of tracks of charged particles in a non-uniform magnetic field. The field modelled is that generated by a coil driven by DC current. The motion of typical particles, such as electrons, ions and multiply-charged heavy particles has been ... 詳細を見る

One of the major applications for dielectrophoresis is the selective trapping and fractionation in lab-on-a-chip devices. Nevertheless, many-particle effects due to high concentrations of biological material around electrodes can cause a rapid decrease of trapping efficiency in ... 詳細を見る

Microplastic contamination in sediment samples presents analytical challenges, as microplastic concentrations typically remain below 1% in environmental matrices [1]. Current analytical workflows require cost-effective and rapid pre-separation methods to concentrate microplastic ... 詳細を見る

Recognized for its potential as a sustainable food source, seaweed farming has become pivotal in tackling future food security concerns, necessitating innovative solutions to achieve optimal, high-yield, and commercially viable production [1]. This work addresses gaps in aquaculture ... 詳細を見る

The transfer molding process is a widely used method for encapsulating microelectronics and power semiconductor devices. In power electronics, it is gaining increasing importance, particularly in the automotive sector [1]. In transfer molding, an epoxy mold compound (EMC) is injected ... 詳細を見る

Efficient mixing and pumping of liquids at the microscale is a technology that is still to be optimized. The combination of an AC electric field with a small temperature gradient leads to a strong electrothermal flow that can be used for multiple purposes. Combining simulations and ... 詳細を見る

PECM is a necessary extension to traditional ECM for some high-performance materials. Electrolyte flow in the inter-electrode gap (IEG) can be assisted using a magnetic field to allow higher currents, but this creates a magnetohydrodynamic flow. This paper presents a study of flow ... 詳細を見る

This study presents a combined simulation and experimental investigation of mixing performance in a batch mixer, with the goal of validating simulation results and identifying optimization potential. The focus is on evaluating mixing times and flow fields to enhance process efficiency, ... 詳細を見る