Tim Poole, JDR Cables, Cambridgeshire, UK
and
Mark Yeoman, Continuum Blue, Hengoed, UK
JDR Cables designs-to-spec and manufactures subsea umbilical systems of cables and reelers for the oil and gas and renewable energy industries. In these designs, the harsh environments of deep water pressure, wind and waves, as well as the rough ocean floor must all be considered, along with the forces acting on cables from being pulled and deployed through tight-radius reels. A challenge for Tim Poole of JDR Cables, and Mark Yeoman of COMSOL Certified Consultant, Continuum Blue, has been to do this in systems where over 3,000 localized regions of high contact have been identified.
They turned to COMSOL Multiphysics to perform the local stress, fatigue and thermal analyses. Firstly, they created 3D cable structures with a proprietary program and included it through COMSOL’s Livelink™ for MATLAB®.
From here, they could explore many loading conditions on various cable designs, and compare the results in a very short space of time. Their models cost half as much as physical testing, and led to reductions in manufacturing costs.
Suggested Stories
National Grid Models Underground Cable Routes
U.K. National Grid bears responsibility for maintaining the high-voltage transmission network in the U.K. Determining ...
Improving Gas Pipeline Squeeze-Off Standards with Numerical Simulation
Gas Technology Institute (GTI), a leader in natural gas research, development, and training, investigated industry ...
A STEP in the Right Direction: Modeling AC Losses in a Tokamak Design
The Spherical Tokamak for Energy Production (STEP) program aims to deliver a prototype fusion energy plant in the ...
Better Ways to Heat and Cool Buildings
Adsorptive climate control systems can reduce the power required to heat and cool buildings by running primarily on ...
