Luke T. Gritter, Sergei Yushanov, Jeffrey S. Crompton, and Kyle C. Koppenhoefer
AltaSim Technologies, Columbus, Ohio
Using COMSOL Multiphysics, AltaSim Technologies were able to predict the temperature distribution and flow pattern of a burning flame during steady state candle burning.
In a burning candle, local temperatures in the flame exceed 1400 °C. The heat transfer would include radiation, conduction, and convection components while the low melting point of the candle wax would cause a local phase change to occur close to the wick, allowing mass transport via capillary flow prior to combustion in the flame.
Modeling this behavior has shown that the temperature and flow patterns are considerably influenced by the spatial location of the flame in a container, the geometry of the container, and the height of the candle within the container.
Suggested Stories
A 100-Fold Improvement in Lithography Resolution Realized with a 150-Year-Old “Perfect Imaging” System
The idea of "perfect imaging", that is a resolution less than the wavelength of light producing the image, was first ...
Medtronic Advances Ablation Technology with Multiphysics Simulation
Researchers at Medtronic studied ablation technology using multiphysics simulation to enhance physicians' abilities to ...
Optimization Slashes Energy Consumption in Silicon-Based MEMS CO2 Detectors
CEA-MINATEC is an international center for micro and nano-technologies which is funded by CEA, a French government ...
Optimizing the Performance of Complex Building Façades
Engineers at Newtecnic specialize in complex building design, working with bold and fluid architectural shapes. To ...
