SIMULATION SUCCESS STORIES

Rautaruukki Oyj Uses Simulation to Help Fine-Tune Oven Setups

製造業

Mika Judin
Rautaruukki Oyj
Hämeenlinna, Finland

Rautaruukki Oyj supplies metal-based components and systems to the construction and mechanical engineering industries, where process engineer, Mika Judin, works with optimizing their coating technologies. When coating rolled metal with paint, it is important that the coating be applied such that it is not discolored or damaged, and that it is applied evenly. Heat transfer therefore needs to be fully understood.

Judin used COMSOL Multiphysics to determine the heat conductivity of the paint during the drying process in a 3D model and then, with this information, to model the whole oven drying process. The models considered heat transfer, a liquid-to-vapor phase change, and a liquid-to-solid phase change.

His analyses made it possible to fine-tune oven setups and provide feedback to paint manufacturers. Using his models, he was also able to achieve a high degree of product uniformity and quality throughout the shifts run by different operators.

  •  /
1
Loading PDF...

Suggested Stories

Industrial Applications of Carbon and Graphite for Thermal Management

Industrial Applications of Carbon and Graphite for Thermal Management

At GrafTech International, engineers develop carbon and graphite products for applications from consumer electronics ...

Modeling of Laminar Flow Static Mixers

Modeling of Laminar Flow Static Mixers

Veryst Engineering, a company that provides consulting in engineering design and product manufacturing, has ...

A New Route to High Sensitivity Pressure Sensors

A New Route to High Sensitivity Pressure Sensors

The environments in which sensors are most integral are often the most harsh and unforgiving, such as vacuum chambers, ...

Virtual Material Design in 3D Printing Makes Headway with Multiscale ...

Virtual Material Design in 3D Printing Makes Headway with Multiscale Modeling

The advantages of anisotropic properties in 3D printing materials have been difficult to exploit for product design, ...