Axial Field Magnetic Gear in 3D

Application ID: 22301


In this model, an axial field magnetic gear with a gear ratio of 5:2 is modeled. Both the high speed and low speed rotors consist of permanent magnet and back iron.

The low speed rotor consists of five pole-pairs, while the high speed rotor consists of two pole pairs, and the stationary steel consists of seven pole-pairs.

The Rotating Machinery, Magnetic interface is used to evaluate the torque ratio of the device. Due to the axial flux configuration, the full 3D model is required to investigate the device performance.

This model example illustrates applications of this type that would nominally be built using the following products:

AC/DCモジュール