アプリケーションギャラリ

This model shows how to add several linked mobility models to the simple MOSFET example. 詳細を見る

This model extracts spice parameters for a silicon p-n junction diode. The spice parameters are used to create a lumped-element equivalent circuit model of a half-wave rectifier that is compared to a full device level simulation. In this example, a device model is made by connecting a 2D ... 詳細を見る

This model demonstrates how to compute the volumetric fluence rate in an ultraviolet (UV) reactor. The geometry is the annular fluid region surrounding a cylindrical lamp. The effect of reflection at the reactor walls on the radial fluence rate distribution is considered. 詳細を見る

A Fresnel lens can be constructed from a plano-convex lens as a way to reduce the thickness. This model models the collimation property of a Fresnel lens and demonstrates the geometry operation of making a Fresnel lens from a plano-convex lens. 詳細を見る

This tutorial example shows how to set port features in a physics interface when designing a grounded coplanar waveguide (GCPW) circuit that is useful for mmWave applications. 詳細を見る

このアプリでは, 以下の機能を紹介します. 計算された特定の周波数で音を再生 コンボボックスから異なる材料を選択 材料の外観, 色, テクスチャを可視化 コンピューター, タブレット, スマートフォン向けに3種類のユーザーインターフェースレイアウトを選択 セカント法のカスタム実装 カスタムウィンドウアイコン 音叉を叩くと, 複雑な動作パターンで振動します. このパターンは, 固有モードとも呼ばれる共振モードの重ね合わせとして数学的に記述できます. 各モードは特定の固有周波数に関連付けられています. 音叉は, ... 詳細を見る

Buckling is a common failure mode for slender structural components. This model shows how the buckling load of a diagonal brace can be maximized, while constraining the volume of the brace. 詳細を見る

Anisotropic hyperelastic materials are used for modeling collagenous soft tissue in arterial walls. The Arterial Wall Mechanics application describes a section of an artery based on the Holzapfel–Gasser-Ogden hyperelastic material model. In this example the dynamic behavior of the artery ... 詳細を見る

This is a conceptual model illustrating how to couple fluid-structure interaction, heat transfer, and thermal expansion. A bimetallic strip in an air channel is heated so that it bends. After some time, an airflow with an inlet temperature which varies in time is introduced. As a ... 詳細を見る

An evanescent mode cavity filter can be realized by adding a structure inside of the cavity. This structure changes the resonant frequency lower than the dominant mode of the unfilled cavity. A piezo actuator is used to control the size of a small air gap which provides the tunability of ... 詳細を見る