アプリケーションギャラリ

The drift velocity of Ar+ is calculated using a Monte Carlo simulation in which the elastic collisions of Argon ions with ambient neutrals are explicitly modeled. The model uses energy-dependent collision cross-section data from experiment. The average ion velocity values are consistent ... 詳細を見る

Gas cells have several applications in the design of scientific instruments. A gas cell is used to define a high-pressure region within the instrument's main vacuum system. For example, in this application, note we are designing a high-pressure region 100 mm long, with an operating ... 詳細を見る

A capacitive micromachined ultrasonic transducer (CMUT) is a micro-scale receiver that converts ultrasound to electrical signal for high-resolution imaging application. This CMUT design has optimized force-displacement characteristics for increased transduction efficiency. Central to the ... 詳細を見る

This three-phase induction motor model is used to compare with Testing Electromagnetic Analysis Method (TEAM) workshop problem 30. The Magnetic Fields physics interface is used to model the motor in the frequency domain at 60 Hz. The Velocity (Lorentz Term) feature is used to model the ... 詳細を見る

磁場中の鉄球は, 磁場が透過性材料と相互作用する効果を示す優れた教科書的な例です. このチュートリアルシリーズは, COMSOL を用いた電磁効果の数値モデリングの入門として設計されています. このシリーズでは, 静的背景磁場と 60 Hz, 20 kHz, 13.56 MHz の3つの時間変動磁場からなる4つの異なる背景磁場レジームを解析します. これらのレジームはそれぞれ独自の挙動と前提を持ち, 異なるモデリング手法を用いています. これらのモデルはすべて, 入門モデルを出発点として, 任意の順序で完成させることができます. 詳細を見る

An electron gun must be able to draw a sufficient current and accelerate the electrons to the desired speed. The first part of an electron gun geometry presents unique design challenges because the emitted electron speeds are usually lowest there, and therefore the space charge density ... 詳細を見る

For an electrochemical reaction to occur, the reacting species usually needs to adsorb to the electrode surface before undergoing reduction or oxidation, after which the resulting product species desorbs back into the electrolyte. If the rate of adsorption or desorption is slow in ... 詳細を見る

This example investigates the electrical and thermal characteristics of a plasma DC arc created in a point-to-plane configuration. The discharge is assumed to be in local thermodynamic equilibrium. The plasma is considered a conductive fluid medium and is modeled using a ... 詳細を見る

このチュートリアルでは, パラメーター推定機能を用いて MEMS 共振器の電気回路モデルを導出する方法を説明します. このモデルは, 電気回路インターフェースを用いて作成された修正 Butterworth-Van Dyke 回路であり, 薄膜バルク音響共振器 (FBAR) を表しています. パラメーター推定スタディを用いて, モデル内の集中定数素子のパラメーターを解析しました. 詳細を見る

This tutorial compares experimental data from the literature with a COMSOL model of a MOSCAP with interface traps (surface states). The Trap-Assisted Surface Recombination feature is used to simulate the effects of the trap charges and the processes of carrier capturing and emitting by ... 詳細を見る