Problem Description
The error "Failed to respect boundary element on geometry face" occurs.
Solution
First, due to continual improvements in meshing, make sure to use the latest version of COMSOL Multiphysics: Product Download
The mesh generator failed in making the elements compatible with the geometry object’s edges. The reason for this could be that the face mesh is too coarse or contains adjacent elements with large differences in scale. Another reason can be that some domains in the geometry are too narrow with respect to the rest of the geometry. Try to avoid creating small and narrow domains and very short boundary segments that are adjacent to longer boundary segments. Use Remove Details and Virtual Operations to clean up the geometry. Check the information in the error message for details about location and possible cause of the problem. Also see the section "Troubleshooting Free Tetrahedral Mesh Generation" in the COMSOL documentation.
If possible, send the model file which is causing the issue to COMSOL Technical Support.
COMSOL は, 本ページに掲載されている情報の確認に合理的な努力を払っております. リソースおよびドキュメントは情報提供のみを目的としており, COMSOL はその有効性について明示的または黙示的な保証を行いません. 開示されたデータの正確性について, COMSOL は法的責任を負いません. 本文書で言及されている商標はすべて, それぞれの所有者に帰属します. 商標に関する詳細は, 製品マニュアルをご参照ください.