Wave Propagation in Rock Under Blast Loads
Application ID: 12811
Transient analysis of the wave propagation in rock mass caused by a short duration load on the surface. Such loads are typical during tunnel constructions and other excavations using blasting.
The model shows the use of the Low-reflecting boundary conditions to truncate the computational domain to a reasonable size. The results are in very good agreement with those presented in the following reference:
Henrik Sönnerlind, 2005, "Beräkningsmetoder för spänningar i explosionsbelastad berg", rapport nr 001202, Epsilon HighTech Innovation AB. (report with Public Access status)
This model example illustrates applications of this type that would nominally be built using the following products:構造力学モジュール
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the 製品仕様一覧 and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.