モデル・ギャラリー

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Electrokinetic Valve

This model presents an example of pressure driven flow and electrophoresis in a 3D micro channel system. Researchers often use a device similar to the one in this model as an electrokinetic sample injector in biochips to obtain well-defined sample volumes of dissociated acids and salts and to transport these volumes. Focusing is obtained through pressure driven flow of the sample and buffer ...

Electrowetting Lens

The contact angle of a two-fluid interface with a solid surface is determined by the balance of the forces at the contact point. In electrowetting the balance of forces at the contact point is modified by the application of a voltage between a conducting fluid and the solid surface. In many applications the solid surface consists of a thin dielectric deposited onto a conducting layer; this is ...

Oscillating Droplet - new

Cemented tungsten carbides are hard metals used in steel cutting tools. They are produced by heating a powder consisting typically of tungsten carbide (WC) grains and cobalt (Co) grains. When the powder is heated, the cobalt melts but the tungsten carbide remains solid. The liquid cobalt glues the tungsten carbide grains together and forces air to flow out of the material. When the medium is ...

Star-Shaped Microchannel Chip

This model presents a time-dependent study of a microchannel that is used to infuse and flush another piece of equipment with a fluid. The pressure at the five inlets varies sinusoidally as functions of time, and the velocity vector at the outlet is studied. The model uses an extruded prism mesh, which reduces the computational time and memory requirements.

Lamella Mixer

At the macroscopic level, systems usually mix fluids using mechanical actuators or turbulent 3D flow. At the microscale level, however, neither of these approaches is practical or even possible. This model demonstrates the mixing of fluids using laminar-layered flow in a MEMS mixer. This model analyzes the steady-state condition of the fluid flow as well as the convection and diffusion of a ...

Knudsen Minimum

When a constant pressure difference drives flow through a narrow constriction between parallel plates (or through a cylindrical tube), the flow rate exhibits a characteristic minimum as the absolute pressure at the inlet is reduced. This phenomenon is commonly referred to as Knudsen’s minimum, and occurs as a result of the rarefaction of the gas. The observation of a minimum in flow rate for ...

Topological Optimization of a Tesla Microvalve

This model performs a topological optimization for a Tesla microvalve. A Tesla microvalve inhibits backwards flow using friction forces rather than moving parts. The design can be optimized by distributing a specific amount of material within the modeling domain. The goal is to maximize the ratio of the pressure drop for the forwards and backwards flow across the device.

Viscous Catenary

The catenary is the geometrical shape that corresponds to the curve followed by an idealized chain or cable supported at both ends and hanging under its own weight. The viscous catenary problem describes the motion of a cylinder of highly viscous fluid, supported at its ends as it flows under gravity. In the last decade this problem has generated significant theoretical and experimental interest ...

Electrocoalescence

This benchmark model shows how to set up and simulate electrocoalescence phenomena using COMSOL Multiphysics and the Chemical Engineering Module. The calculated results are compared to published experimental work. In the reported experiments, a water droplet is injected in silicone oil, near the interface of a water phase. At the same time, an electric field is applied which affects the ...

Rotating Channel Benchmark

A lab-on-a-chip platform can be realized on a rotating disc by designing channels and other features to use the Coriolis or centrifugal forces to manipulate the flow. These forces are controlled by changing the angular velocity of the disc, so the platform is programmed by using a controlled sequence of angular velocities. In a microchannel, the centrifugal force induces a parabolic flow profile ...

Quick Search