Transport in an Electrokinetic Valve
Application ID: 603
This application presents an example of pressure driven flow and electrophoresis in a 3D micro channel system. Researchers often use a device similar to the one in this model as an electrokinetic sample injector in biochips to obtain well-defined sample volumes of dissociated acids and salts and to transport these volumes.
Focusing is obtained through pressure driven flow of the sample and buffer solution, which confines the sample in the focusing channel. When steady state has been obtained, the pressure driven flow is turned off and an electric field is applied along the channels.
The electric field drives the dissociated sample ions that are found in the focusing zone at right angles to the focusing channel, through the injection channel. This is solved in the time-domain.
This model requires the Chemical Reaction Engineering Module and either the CFD Module or the Microfluidics Module.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
- COMSOL Multiphysics® and
- CFDモジュール, 化学反応工学モジュール, マイクロフルイディクスモジュール, or 地下水流モジュール and
- バッテリ＆燃料電池モジュール, 化学反応工学モジュール, 腐食解析モジュール, 電気化学モジュール, 電気めっきモジュール, or マイクロフルイディクスモジュール
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the 製品仕様一覧 and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.