アプリケーションギャラリ

A thin-walled frame with a central cutout is subjected to a random load. Although the stresses are far below the yield level of the material, damage accumulates over the load history. The Rainflow counting algorithm is used to define the load scenario and Palmgren-Miner linear damage ... 詳細を見る

This model computes the ion energy distribution function (IEDF) for a commercial capacitively coupled plasma reactor. The results show good agreement with experimental data. 詳細を見る

Double-pipe heat exchangers, with their typical U-turn shape, are one of the simplest and cheapest type of heat exchangers used in the chemical process industry. This example studies the cooling of hot oil (130°C) by a cool oil (60°C) entering in counter-current. As the oils flow ... 詳細を見る

This model represents a test case of a flow in an elastic tube which is present in several applications. This specific case models viscoelastic flow and represents steady flow in a channel in which part of the upper wall is replaced by an elastic plate subjected to an external pressure. ... 詳細を見る

Electrical events, such as an overcurrent or overload, can seriously damage electrical circuits or power lines. To avoid expensive replacements of critical parts, electric switch circuit breakers can be installed. These mechanically interrupt the current flow or surge by moving a plunger ... 詳細を見る

This model performs a topological optimization for a Tesla microvalve. A Tesla microvalve inhibits backwards flow using friction forces rather than moving parts. The design can be optimized by distributing a specific amount of material within the modeling domain. The goal is to maximize ... 詳細を見る

In this model, sound created by a vibrating piston radiates through a baffled pipe. The impedance is measured and then used in an impedance boundary condition that replaces the surrounding air domain. This technique can be employed to reduce solution time and memory usage for large ... 詳細を見る

計算性能の向上と新しい数値手法の開発により, 室内音響シミュレーションにおける波動ベースの技術の使用はここ数年で広まっています. 壁における現実的なインピーダンス条件を含めるという課題は, 従来は周波数領域で解決されてきました. 最近の研究では, データの部分分数表現を使用して, 時間領域モデルに周波数依存インピーダンスを実装することに重点が置かれています. このチュートリアルでは, 部分分数フィット関数を使用して周波数依存の壁インピーダンスデータの部分分数表現を取得する方法と, ... 詳細を見る

This example demonstrates the use of the Solid-Beam Connection multiphysics coupling to create transitions between the Solid Mechanics and Beam interfaces. Two different connection types are discussed, and a comparison of the stress distributions at the transition is made. 詳細を見る

静磁気問題の例として, 馬蹄形の永久磁石をモデル化する方法を考えてみましょう. 1つの方法は, 磁石全体を強磁性体として扱い, 両端のセクションが異なる反対方向に事前に磁化されていると定義することです. 詳細を見る