System Requirements: Interfacing Products for Version 6.0

CAD Import Module and Design Module

Operating System Version
Windows® Windows® 7, Windows® 8.1, Windows® 10, and Windows® 111,2
macOS 10.14, 10.15, 113, and 121,2,3
Linux® OS-specific system requirements only1,2

1File import of the NX™ file format is available only on a supported Windows® or Linux® operating system.

2File import of the AutoCAD®, Inventor®, and SOLIDWORKS® file formats is available only on a supported Windows® operating system.

3File import of the ACIS, IGES, PTC Creo Parametric™, PTC Creo® Elements Pro, STEP, and PTC Pro/ENGINEER® file formats on macOS 11 and 12 with the M1 processor requires Rosetta 2.

For a list of supported file formats for CAD file import and export, see the CAD Specification Chart.

LiveLink™ Products for CAD Software

The bidirectional interface functionality of the product suite detailed in the table below is available only for Windows® 7, Windows® 8.1, and Windows® 10; except for LiveLink™ for PTC Pro/ENGINEER®, which is available only for Windows® 7. Synchronization in offline mode is available on all supported Windows®, Linux®, and macOS operating systems. For other included functionality, such as file import and geometric operations, see the CAD Import Module and Design Module table.

LiveLink™ Compatible Software
LiveLink™ for AutoCAD® AutoCAD® 2021 and 2022
LiveLink™ for Inventor® Inventor® 2021 and 2022; Inventor® Professional 2021 and 2022
LiveLink™ for PTC Creo Parametric™ PTC Creo Parametric™ 4.0, 5.0, 6.0, 7.0, and 8.0
LiveLink™ for PTC Pro/ENGINEER® PTC Pro/ENGINEER® Wildfire® 4.0 and 5.0, and PTC Creo® Elements Pro 5.0
LiveLink™ for Revit® Revit® 2021 and 2022
LiveLink™ for Solid Edge® Solid Edge® 2021 and 2022
LiveLink™ for SOLIDWORKS® SOLIDWORKS® 2021 and 2022

File Import for CATIA® V5

The File Import for CATIA® V5 add-on to the CAD Import Module, Design Module, and LiveLink™ products for CAD is only available for Windows® 8.1, Windows® 10, and Windows® 11.

LiveLink™ for Excel®

An Excel® installation is not required for reading and writing Excel files. LiveLink™ for Excel® offers additional features when Excel® is installed on the Windows® operating system. LiveLink™ for Excel® is compatible with Excel® 2010, 2013, 2016, 2019, and 2021 on the Windows® operating system. Excel® 2010 Starter is not supported. If using Office 365 Excel® must be installed on the computer — LiveLink™ for Excel® requires a version of Excel that supports VSTO addins.

LiveLink™ for MATLAB®

LiveLink™ for MATLAB® is compatible with MATLAB® R2021a and R2021b on all supported operating systems. For Linux® operating system, the xterm and csh programs are required. For macOS operating system, the XQuartz and csh programs are required. The LiveLink™ for MATLAB® is not supported on macOS 11 and 12 with the M1 processor.

LiveLink™ for Simulink®

LiveLink™ for Simulink® is compatible with Simulink® R2021a and R2021b on all supported operating systems. For Linux® operating system, the xterm program is required. For macOS operating system, the XQuartz program is required. The LiveLink™ for Simulink® is not supported on macOS 11 and 12 with the M1 processor. Note that LiveLink™ for Simulink® is not supported for use with the Application Builder, COMSOL Compiler™, or COMSOL Server™.

Note: This information is provided for your benefit, but should not be used as a substitute for your own investigation of the system requirements that may be appropriate for your use of COMSOL® software or other software, given your particular circumstances. Systems and hardware change regularly, which may impact any determination of what system requirements are appropriate for you.

Autodesk, the Autodesk logo, AutoCAD, Inventor, and Revit are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. CATIA is a registered trademark of Dassault Systèmes or its subsidiaries in the US and/or other countries. Linux is a registered trademark of Linus Torvalds in the U.S. and other countries. macOS is a trademark of Apple Inc., in the U.S. and other countries. MATLAB and Simulink are registered trademarks of The MathWorks, Inc. Microsoft, Excel, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. NX is a trademark or registered trademark of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. PTC, Creo, Creo Parametric, Pro/ENGINEER, and Wildfire are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. SOLIDWORKS is a registered trademark of Dassault Systèmes SolidWorks Corp. COMSOL AB and its subsidiaries and products are not affiliated with, endorsed by, sponsored by, or supported by these trademark owners.