Keynote Video: Optimizing Cable Systems via Simulation

Bridget Paulus January 28, 2019

Cables provide power to sky-high airplanes, underground mines, and offshore wind farms. Depending on the use case, cables can have vastly different shapes, sizes, and environments — all of which affect their performance. In his keynote talk at the COMSOL Conference 2018 Lausanne, Adrien Charmetant of Nexans explained how multiphysics modeling is used to optimize cable designs. Below, you can find a summary and video of his presentation.

Read More

Brianne Christopher January 22, 2019

The EPFLoop team took the stage at the COMSOL Conference 2018 Lausanne with their hyperloop pod design, setting it down for the crowd to see. Learn about the different ways that the team of students and faculty from the École Polytechnique Fédérale de Lausanne, led by Mario Paolone and including Nicòlo Riva, Zsófia Sajó, and Dr. Lorenzo Benedetti, used multiphysics simulation to land in the top spot for hyperloop design at the 2018 SpaceX competition.

Read More

Brianne Christopher January 21, 2019

In a fluid-structure interaction (FSI) scenario, the fluid can affect the structure, the structure can affect the fluid flow, or both. When modeling a device that relies on FSI, you may want to simulate one of these options, a combination, or all three. The Fluid-Structure Interaction multiphysics coupling in the COMSOL® software makes it easy to implement FSI in your analyses. In this blog post, we study the flow through a ball check valve for different flow directions and pressures.

Read More

Erik Melin January 16, 2019

The goal of mesh adaptation is to modify the mesh to solve a problem more efficiently. We want to use as few elements as possible to obtain an accurate solution. Typically, we would like a coarser mesh in regions that are not very important and a more refined mesh in regions of interest. We might even consider anisotropic elements. As of version 5.4, the COMSOL Multiphysics® software includes enhanced tools to adapt a mesh. Let’s take a look.

Read More

Thomas Forrister December 26, 2018

Radioactive materials have a long half-life, so they must be stored safely — usually in steel drums. These drums are then stored in confinement systems, which are designed with safety in mind (so that they can resist, for instance, a fire event exceeding two hours). Sogin, the state-owned company responsible for the Italian nuclear sites decommissioning and radioactive waste management, evaluated the fire resistance of a confinement system overpack using the COMSOL Multiphysics® software.

Read More

Bridget Paulus December 13, 2018

Groundwater is an important source of irrigation and drinking water, so keeping it pure is crucial. However, once contaminants get in, it isn’t so easy to get them out — creating systems to remove contaminants from groundwater requires an understanding of the complex way immiscible fluids move through soil. To gain insight into this behavior, engineers can use the phase transport functionality in the COMSOL® software.

Read More

Xavier Corbella Coll December 10, 2018

Until the early 1900s, shock waves were an academic problem studied from a theoretical point of view only. Many great scientists, including Lord Rayleigh, worked on the field until the theory of inviscid shock waves was established in the 1920s. During World War II, this theory started to be applied, mostly to supersonic vehicles. To study shock waves, one important gas dynamic instrument is the shock tube, which is used to test supersonic and hypersonic flows and high-temperature gases.

Read More

Thomas Forrister December 5, 2018

Heart failure is a global health concern, affecting millions of people and keeping them from their everyday lives. But what if there was a device that could keep patients’ hearts pumping and even improve their quality of life? In his keynote presentation at the COMSOL Conference 2018 Boston, Freddy Hansen from Abbott Laboratories discussed a heart pump that could do just that. If you missed his talk, you can watch a recording of the video and read a summary below.

Read More

Ed Fontes November 29, 2018

There has always been a debate among engineers working with fluid flow about the suitability of finite element methods for CFD. Some engineers have a firm opinion about the superiority of finite volume methods compared to finite element methods. Is there a scientific support for this opinion? No, not in general. Different methods may be suitable for different problems. Let us see why.

Read More

Caty Fairclough October 4, 2018

Imagine that you’re indoors during a thunderstorm, watching raindrops trickle down the window. Despite the storm, you remain dry and warm thanks to the building envelope protecting you from the outside environment. To design a well-functioning building envelope, engineers need to account for a variety of different factors. Simulation can help address this need.

Read More

Siva Sashank Tholeti August 22, 2018

Sparging, a mass transfer process between a gas and a liquid, is commonly encountered in industrial applications such as beverage carbonation and photobioreactors, or even at home for aeration in aquariums. In this blog post, we detail how to model a type of sparging, carbonation, using the COMSOL Multiphysics® software.

Read More


Categories


Tags

1 2 3 15